Cheap Mazda RX-8 Handbrake Lever
Compare prices on a used Mazda RX-8 handbrake lever from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Mazda RX-8 handbrake lever
Used handbrake levers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's a manual lever, foot pedal or electronic
Other used Mazda RX-8 parts
- Used Mazda RX-8 Airbag Control Module
- Used Mazda RX-8 Heater Matrix
- Used Mazda RX-8 Seat Belt
- Used Mazda RX-8 Centre Console
- Used Mazda RX-8 Engine Wiring Loom
- Used Mazda RX-8 Airbag
- Used Mazda RX-8 Window Motor
- Used Mazda RX-8 Gear Stick
- Used Mazda RX-8 AC Compressor
- Used Mazda RX-8 Starter Motor
- Used Mazda RX-8 Turbo
- Used Mazda RX-8 Engine Mount
Used handbrake lever for other Mazda models
Fitment questions
Does the Mazda RX-8 actually have a handbrake lever?
Yes, the RX-8 is a rear-wheel-drive car and was fitted with a conventional mechanical handbrake lever as standard across all variants. It sits between the front seats in the centre console and operates the rear brakes via a cable. So sourcing a used handbrake lever from a breaker is a perfectly normal request for this model.
Will a handbrake lever from an early RX-8 (2003-2008) fit a later facelift RX-8 (2008-2012)?
The RX-8 ran from 2003 to 2012, with a significant facelift arriving in 2008 that brought interior updates including changes to the centre console area. Because of these interior revisions, a pre-facelift lever and a post-facelift lever may not be a straightforward swap, so you should confirm with the breaker that the part they have is from the same phase as your car, quoting your registration. Never assume a pre-2008 part will drop straight into a post-2008 car without verification.
Does the trim level affect which handbrake lever I need — for example, does it matter if my RX-8 is a standard, PZ or R3?
Trim level is unlikely to affect the handbrake lever mechanism itself, as the functional part is shared across the range. However, the lever gaiter or surround finishing may differ in material or colour between trims such as the entry-level models, PZ, and the sportier R3, so the cosmetic appearance of a lever pulled from a different-spec car might not match your interior exactly. Confirm with the breaker what trim the donor car was to manage your expectations on finish.
Does the engine make any difference — does a 231 bhp RX-8 use a different handbrake lever to a 189 bhp model?
No, the engine output does not affect the handbrake lever — this is a purely interior, mechanically-driven component with no relationship to which state of tune the rotary engine is in. Focus your search on matching the generation and trim of your car rather than the power output. A breaker holding any RX-8 from the correct phase should have a suitable lever regardless of whether it was the higher or lower power variant.
Does the number of doors on my RX-8 matter for the handbrake lever?
The RX-8 was only ever sold as a four-door body style (using its distinctive rear-hinged suicide doors), so door count is not a variable you need to worry about when sourcing this part. All RX-8s share the same basic centre console layout in that respect, so the door configuration of the donor car at the breaker will always match yours.
What should I check with the breaker before buying a used RX-8 handbrake lever?
Ask the breaker to confirm whether the car is a pre-facelift (2003-2008) or facelift (2008-2012) model, as this is the most important fitment factor for interior parts. It is also worth asking about the trim level of the donor car if you want the gaiter and surround to match your interior finish. Quoting your registration to the breaker is the best way to make sure they can cross-check the part against your specific vehicle.