Used Hyundai Kona Steering Rack

The Hyundai Kona has been sold in the UK in two main generations: the first generation ran from 2017 to 2023, with a facelift arriving around 2021, and the second generation launched in 2023. Within the first generation, racks are broadly likely to interchange, but whether a pre-facelift (2017–2020) rack fits a post-facelift (2021–2023) car is something you should confirm with the breaker against your exact registration, as Hyundai sometimes revised steering components at refresh points. Never assume fitment without the breaker checking your VIN.

A 2019 Kona is pre-facelift first generation and a 2022 Kona is post-facelift first generation, so you are spanning the 2021 facelift boundary. Both cars sit within the same overall first-generation platform, which is encouraging, but steering rack changes can accompany facelifts and you must confirm compatibility with the breaker using your registration before buying. Do not assume the part will drop straight in without that check.

Yes, engine size can matter for steering rack fitment — the Kona was offered with different engines including 1.0-litre and 1.6-litre petrols, as well as a fully electric powertrain, and the electric Kona uses an entirely different steering system to the combustion-engined cars. Give the breaker your exact engine size and fuel type, not just the model name, to make sure you get the right rack. Always confirm against your registration.

Trim level does not affect steering rack fitment on the Hyundai Kona — the rack is determined by generation, facelift status, and drivetrain, not by whether your car is SE, Premium, or Ultimate. You may find cosmetic differences between breaker cars such as different interior spec or wheel styles, but these have no bearing on whether the rack itself will fit. Focus on matching the generation and engine type rather than the trim badge.

The N Line is a styling-focused trim on the first-generation Kona rather than a full performance variant, and in most cases it shares the same steering rack as equivalent standard-trim cars of the same engine and generation. However, if the N Line car has different suspension tuning it is worth asking the breaker to confirm the part number matches your car's specification before purchase. Confirm fitment against your registration to be safe.

No — the Kona and Tucson are different platforms and sizes, and their steering racks are not interchangeable despite sharing the Hyundai badge. Always source a rack specifically listed for the Kona, and give the breaker your year, engine size, and registration to make sure they pull the correct unit. Cross-model fitment should never be assumed.