Second Hand Hyundai i10 Seat Belt Pretensioner

Seat belt pretensioners are fitted to all generations of the Hyundai i10 as standard safety equipment — they are not limited to a particular engine or trim level. Every i10 sold in the UK came with pretensioners as part of the SRS restraint system, so you won't find a variant that never had them. However, the specific pretensioner unit can vary by generation, trim, and which side of the car you need, so it's important to match these details carefully when sourcing a used part.

The first-generation i10 ran from 2008 to 2013, and the second generation from 2014 to 2019, and these are distinct platforms with different interior designs, so a pretensioner from one generation will not cross over to the other. You must source a pretensioner from the same generation as your car. Even within each generation there can be pretensioner variants, so confirm the exact compatibility with the breaker using your registration number before agreeing a purchase.

Trim level can affect seat and interior specification on the i10, so it is worth mentioning your trim when speaking to a breaker, particularly if your car has sport or upgraded seats. That said, the side of the car (nearside or offside) and the generation are the primary matching factors — confirm the exact pretensioner variant against your registration with the breaker to be sure. Do not assume a pretensioner from a different trim is a guaranteed fit without checking first.

A 2013 i10 is a first-generation car, while a 2016 i10 falls in the second generation (2014–2019), so these are from different platforms and the pretensioner from the 2013 car is very unlikely to be compatible. You should look for a donor car from the second-generation range (2014–2019) to stand the best chance of a match. Always confirm the specific part against your registration with the breaker before buying, as pretensioner variants can exist even within a generation.

Yes — seat belt pretensioners are side-specific, so you must specify whether you need the nearside (NS, passenger side) or offside (OS, driver side) unit when contacting a breaker. Fitting the wrong side is not possible as the components are handed to suit the seat and pillar geometry on each side. Make this clear in your quote request to avoid being sent the wrong part.

Seat belt pretensioners are safety-critical components and are single-use devices — once deployed they must be replaced, and they cannot be reset or reused. Professional fitting by a qualified technician is strongly recommended, as incorrect installation can affect the performance of the entire SRS restraint system in a collision. A garage will also be able to clear any SRS fault codes and verify the system is functioning correctly after the repair.