Second Hand Hyundai Coupe Bonnet Latch
Compare prices on a used Hyundai Coupe bonnet latch from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Other used Hyundai Coupe parts
- Used Hyundai Coupe Front Grille
- Used Hyundai Coupe Front Bumper
- Used Hyundai Coupe Bonnet Strut
- Used Hyundai Coupe Indicator Light
- Used Hyundai Coupe Clutch Master Cylinder
- Used Hyundai Coupe Spoiler
- Used Hyundai Coupe Exhaust System
- Used Hyundai Coupe Wiper Motor
- Used Hyundai Coupe Starter Motor
- Used Hyundai Coupe AC Compressor
- Used Hyundai Coupe Fuel Filter
- Used Hyundai Coupe Sun Visor
Used bonnet latch for other Hyundai models
Fitment questions
Will a bonnet latch from a 2003 Hyundai Coupe fit my 2006 model?
The Hyundai Coupe ran in its second generation (RD2) from roughly 1999 to 2007, with a facelift arriving around 2002 that updated the front end including the bonnet and surrounding panels. Both your 2003 and 2006 cars fall within the same post-facelift period, so there is a reasonable chance the latch and striker will interchange, but confirm the exact part numbers with the breaker against both registrations before buying.
Does the bonnet latch from a first-generation Hyundai Coupe (RD1, 1996–1999) fit a second-generation model (RD2, 1999–2007)?
The RD1 and RD2 are entirely different generations with different bodyshells and front-end structures, so the bonnet latch and striker arrangement are unlikely to be compatible. Always treat these as separate applications and confirm the generation of any used part with the breaker against your registration number.
Does it matter which trim level my Hyundai Coupe is — SE, S, or FX — when sourcing a bonnet latch?
Trim level does not affect bonnet latch fitment on the Hyundai Coupe; the latch mechanism is shared across SE, S, FX and other trim variants within the same generation and facelift period. You may find minor cosmetic differences around the bonnet release cable or interior handle finish depending on trim, but the latch itself is not trim-specific, so any matching-generation part should be suitable subject to confirmation with the breaker.
Does the engine size matter when buying a used bonnet latch for a Hyundai Coupe?
No — the bonnet latch on the Hyundai Coupe is the same regardless of whether your car has a 1.6, 2.0, or 2.7 V6 engine, as it is a front-end structural fitment shared across all engine variants within a generation. Simply match the generation and facelift period rather than worrying about engine size.
Is there a facelift on the second-generation Hyundai Coupe, and does it affect which bonnet latch I need?
The second-generation Hyundai Coupe (RD2) received a facelift around 2002, which brought changes to the front bumper, lights and grille area. The bonnet latch and its mounting points may or may not have changed at that facelift boundary, so if you are trying to source a part that crosses the pre- and post-2002 divide, confirm compatibility with the breaker using both vehicles' registration numbers rather than assuming they interchange.
Do I need to worry about left-hand drive versus right-hand drive when buying a Hyundai Coupe bonnet latch in the UK?
The bonnet latch mechanism on the Hyundai Coupe is typically the same for both LHD and RHD vehicles, as it sits centrally at the front of the car rather than being offset to either side. However, the internal bonnet release cable routing and handle position can differ, so mention to the breaker that you need a right-hand-drive compatible cable and handle setup if sourcing the full assembly.