Ford Ranger Glove Box Replacement Parts

The Ranger has gone through distinct generations in the UK — the T6 generation ran from 2011 to 2022 (with a notable facelift around 2015–2016 and a further refresh in 2019), while the next-generation T9 arrived from 2023 onwards. Glove boxes are interior trim parts that match by generation, so a T6 donor vehicle should generally suit another T6, but whether a pre-facelift and post-facelift unit swap cleanly across those internal boundaries is worth confirming with the breaker against your exact registration. A T9 glove box will not fit a T6, and vice versa.

Trim level can affect interior fitment on the Ranger, as higher trims like Wildtrak, Thunder, and Raptor sometimes feature different dashboard finishes, locking glove boxes, or additional switchgear compared to entry-level XL or mid-range XLT. If you are replacing a like-for-like basic unit, an XL glove box may fit an XLT shell but could look different in finish or lack a locking mechanism. It is worth telling the breaker your exact trim so they can match the right unit and avoid cosmetic mismatches.

The T6 Ranger received a significant facelift around 2015–2016 that updated the interior as well as the exterior, so the dashboard architecture may differ between early and later T6 models. Naming that boundary confidently is important — parts from a 2012 Ranger and a 2018 Ranger are not guaranteed to interchange directly, and we would strongly recommend you confirm compatibility with the breaker using both vehicles' registration numbers. Do not assume a pre-facelift unit will drop straight in without checking.

The glove box is a dashboard-mounted component and its fitment is not directly affected by the door count of the vehicle. Whether your Ranger is a Double Cab, Extra Cab, or Single Cab, the dashboard and glove box fit by generation and trim rather than body style. Just confirm the generation and trim level with the breaker and door count should not be a concern for this part.

No — the engine has no bearing on glove box fitment on the Ford Ranger. Interior trim parts like the glove box are determined by the vehicle's generation and trim level, not whether you have the 2.0-litre or 3.2-litre engine, or a manual versus automatic gearbox. You can safely ignore engine details when searching for this part and focus on year range and trim instead.

Give the breaker your registration number so they can confirm the exact generation and facelift phase your vehicle falls into, and also tell them your trim level — for example XL, XLT, Wildtrak, or Raptor — as this affects the style and specification of the unit. Mention whether you need a locking glove box if your original had one, as not all trims include a lock. The breaker can then match the part accurately and advise on any fitment nuances specific to your vehicle.