Used Ford Ka Track Rod

Yes, the Ford Ka is a front-wheel-drive car and track rods (also called tie rods) are a standard part of its front steering rack assembly, so every Ka will have them. You can buy used track rods from a breaker, and they are a commonly available part. Make sure you specify your Ka's generation and which side you need (NS nearside or OS offside) when requesting a quote.

The Mk1 Ka ran from 1996 to 2008 and the Mk2 from 2008 to 2016, and these are completely different platforms — the Mk1 was based on the old Fiesta Mk3/4 floorpan while the Mk2 shared its architecture with the Fiat 500. Parts from these two generations are not interchangeable, so a track rod from a Mk1 will not fit a Mk2. Always quote your registration to the breaker so they can confirm the correct part for your generation.

On the Ford Ka, engine size does not significantly affect track rod fitment — the steering geometry is determined by the platform and generation rather than whether you have a 1.0, 1.2, or 1.3 engine. Both Mk1 and Mk2 Kas used small-displacement engines across their ranges without meaningful suspension architecture differences tied to engine choice. Confirm your generation and registration with the breaker to be sure.

Trim level does not affect track rod fitment on the Ford Ka — parts like Studio, Zetec, or Grand Prix are cosmetic and equipment distinctions rather than mechanical ones, and the steering components are shared across trims within the same generation. A track rod from a basic Studio Ka should be mechanically equivalent to one from a Zetec or Grand Prix of the same generation. Bear in mind breakers may supply the part without any trim-specific cosmetic features, but that will not affect how it fits or functions.

This is an important question because 2008 is the changeover year between the Mk1 (1996–2008) and the Mk2 (2008–2016), so a 2008 Ka could be either generation depending on exactly when it was built and registered. A 2007 car will be a Mk1, but whether a 2008 donor car is also a Mk1 or already a Mk2 needs to be confirmed against its registration. Route this directly to the breaker and give them both registrations so they can check the platforms match before supplying the part.

Yes, track rods are side-specific — you must tell the breaker whether you need the NS (nearside, passenger side) or OS (offside, driver side) track rod. Fitting the wrong side is unlikely to work correctly and could affect your steering geometry and safety. Double-check which side needs replacing before contacting a breaker, and always have the part's fitment confirmed against your registration.