Used Ford Fusion Gearbox

The Ford Fusion was produced in the UK from 2002 to 2012, with a facelift arriving in 2005, and engine code is the single most important factor for gearbox compatibility across that entire run. Gearboxes from the pre-facelift (2002–2005) and post-facelift (2005–2012) periods may share units where the engine code matches, but whether a specific box crosses that 2005 boundary should be confirmed with the breaker against your registration. Always supply your engine code — found on your V5C or via a VIN check — when requesting a quote.

A 2004 Fusion sits in the pre-facelift generation (2002–2005) and a 2007 model is post-facelift (2005–2012), so you are crossing a known production boundary. If both vehicles share the same engine code and fuel type, there is a reasonable chance of compatibility, but ancillary and mounting details can differ across that 2005 facelift point. Run your registration and engine code past the breaker before buying to confirm the specific box will suit your car.

Trim level — whether Zetec, Style, Ambiente, or any other — does not affect gearbox fitment; what matters is engine code, fuel type, and gearbox type (manual or automatic). A box pulled from a Zetec-trimmed car will be mechanically identical to one from an Ambiente if the engine codes match, though ancillary brackets or sensors attached to a second-hand unit may vary and should be checked. Tell the breaker your trim only as background context; your engine code and registration are what they need to source the right gearbox.

Yes — fuel type is a key fitment factor because petrol and diesel engines produce different torque characteristics and the gearboxes are matched accordingly, meaning they are not interchangeable. Always confirm your fuel type alongside your engine code when requesting quotes from breakers on Findapart. Mixing petrol and diesel gearboxes is a fitment error even if the physical bell-housing looks similar.

Whether your specific Fusion's ECU or immobiliser system needs attention after a gearbox swap is something you must confirm with your fitting garage and the breaker against your registration, as this can vary by build date and specification. Findapart breakers can advise on what came with the unit they are supplying, but coding requirements depend on your individual vehicle. It is always worth raising this question before you buy rather than after the box is fitted.

The engine code is the most important detail you can supply — more useful than year, trim, or body style — because gearboxes are matched to the engine, not the badge on the car. You will find the engine code on your V5C logbook or by running a VIN check, and it typically appears as a two or three letter combination (for example, FXJA or HJBB on common Fusion petrol units). Quoting this code to a breaker on Findapart gives them everything they need to pull a compatible unit quickly and confidently.