Ford Fusion CV Joints Replacement Parts

Yes, the Ford Fusion is a front-wheel-drive car, and like all FWD vehicles it uses CV (constant velocity) joints to transmit drive from the gearbox to the front wheels through the driveshafts. You will find a CV joint at both the inner and outer ends of each front driveshaft. If you are looking for a replacement, you will typically be buying either the complete driveshaft or a CV joint and boot kit depending on what has failed.

The Ford Fusion was produced from 2002 to 2012, with a facelift arriving around 2005, and the driveshaft and CV joint dimensions can vary with engine size across that range. Within the same engine variant, earlier and later cars often share the same driveshaft assembly, but you should confirm with the breaker using your exact registration before buying, as mid-run changes can affect spline counts or joint sizing. Never assume a part fits without checking reg-to-reg.

Yes, engine size can influence the driveshaft and CV joint specification on the Fusion, as larger or more powerful engines can use heavier-duty driveshaft components to handle the extra torque. The Fusion was offered with a range of petrol and diesel engines, so always tell the breaker your exact engine size and fuel type alongside your registration. Quoting just the model name is not enough to guarantee the right part.

Yes, it matters — the nearside (NS, left, driver's side on a UK car) and offside (OS, right, passenger's side) driveshafts on the Fusion are different lengths because the gearbox sits offset in the engine bay. Always tell the breaker which side you need, and double-check by measuring your existing shaft or confirming with a parts reference if possible. Fitting the wrong side will mean the driveshaft is the wrong length and will not seat correctly.

Trim level does not affect CV joint fitment on the Ford Fusion — the driveshaft and CV joint specification is determined by engine size and drivetrain, not by whether the car is a base, Zetec, or Ghia model. You can confidently source from a car of a different trim as long as the engine matches your own. The breaker may supply a shaft from a car with a different interior or colour, but that has no bearing on whether it will fit.

The Ford Fusion shares its platform with the Mk4 and Mk5 Ford Fiesta, and some driveshaft components are shared across the two models. However, fitment is not guaranteed across all variants and years, so you should confirm directly with the breaker by providing both vehicles' registrations and engine sizes before purchasing. Do not assume platform-sharing means the parts are identical without that verification.