Used Ford Fiesta Steering Box

No — the Ford Fiesta has never been fitted with a steering box in any of its variants. All generations of the Fiesta use a steering rack (also called a rack and pinion), which is the standard setup for small front-wheel-drive cars. If you need the main steering component on a Fiesta, a used steering rack is what you should be searching for.

A steering box is a recirculating-ball or worm-and-sector unit typically found on older vehicles, trucks, and some large rear-wheel-drive cars, whereas a steering rack uses a pinion gear running along a toothed rack — it is the system used on the Fiesta throughout its entire production history. If your Fiesta steering is feeling vague, heavy, or is leaking, the part you need to replace is the steering rack, not a steering box. Contact a breaker with your registration number to make sure you get the correct rack for your generation and whether it is a power-assisted or electric power-assisted unit.

No — even the performance variants of the Fiesta, including the ST and the older RS models, use a steering rack rather than a steering box. Performance-focused versions of the Fiesta often have a quicker-ratio or differently tuned rack compared with standard models, so it is worth confirming the exact specification with a breaker against your registration. A steering box was simply never part of any Fiesta's design, regardless of trim level or engine.

It is almost certainly a mislabelling or misunderstanding, as the Fiesta has never been built with a steering box — the correct term for its main steering component is a steering rack. Some sellers or listings occasionally use 'steering box' loosely to mean any steering component, so it is worth clarifying exactly what is being offered before you buy. Ask the breaker to confirm the part is a steering rack and that it matches your Fiesta's generation and steering system type (hydraulic or electric power-assisted).