Fiat Scudo Rear Bumper Replacement Parts

The Fiat Scudo ran across two main generations: the first generation covered roughly 1995 to 2006, and the second generation ran from 2007 onwards, sharing its platform with the Citroën Dispatch and Peugeot Expert of the same era. Rear bumpers are not interchangeable between these two generations as the bodywork and mounting points differ completely. Always confirm the exact generation of the part against your registration with the breaker before purchasing.

No — 2005 falls within the first-generation Scudo (1995–2006) and 2009 falls within the second-generation (2007 onwards), and the rear bumpers between these generations are completely different and will not interchange. This is one of the most common fitment mistakes buyers make, so it is worth double-checking your van's generation with the breaker rather than going by year alone. Always confirm against your registration.

For a van like the Scudo, wheelbase and roof height are important things to check, but the rear bumper itself is primarily determined by the generation and whether the van has barn doors or a tailgate at the rear. The bumper sits below the rear aperture, so the door configuration — barn doors versus a tailgate — can affect the bumper's shape and the surrounding trim. Confirm the door type and exact variant of your Scudo with the breaker against your registration to make sure the part matches.

Trim level does not affect rear bumper fitment on the Fiat Scudo — the bumper is determined by generation, body configuration, and rear door type, not by whether the van is a base or higher specification. However, higher trim levels may have had colour-coded or differently finished bumpers compared to unpainted or black bumpers on lower specs, so there can be a cosmetic difference to be aware of even if the fit is the same. Check with the breaker whether the bumper finish matches what you need.

The second-generation Scudo (2007 onwards) shared its platform with the second-generation Citroën Dispatch and Peugeot Expert, and there is potential for parts to cross over between these badge-engineered variants. However, whether a specific rear bumper from one nameplate will fit another can depend on pressing or trim differences between the variants, and this is something you should confirm with the breaker against your registration rather than assume. Do not treat platform-sharing as a guarantee of direct interchangeability.

The Scudo was available in different wheelbases, but for the rear bumper specifically the key factors are the generation (first gen 1995–2006 or second gen 2007 onwards) and the rear door configuration — barn doors or a tailgate — rather than the overall vehicle length. That said, it is worth mentioning your wheelbase variant to the breaker when requesting a quote, as some panel differences between body length variants can exist and are best confirmed against your registration plate.