Second Hand Fiat Panda Door Card

The second-generation Panda ran from 2003 to 2012, so a 2004 and a 2009 are both within the same generation and door cards are generally considered interchangeable within it, provided you match the side (NS or OS) and the door count (3-door or 5-door fronts differ). That said, confirm with the breaker against your exact registration in case of any mid-run trim or supplier changes. Never assume fitment without the breaker verifying against both vehicles.

No — the original Fiat Panda (1980–2003) and the second-generation Panda (2003–2012) are entirely different body structures, and their door cards are not interchangeable. You need to source a card from the correct generation to match your car. Always confirm the generation with the breaker using your registration.

Yes, this is one of the most important fitment factors — front door cards for 3-door and 5-door Pandas differ in shape and panel cut-outs, so they are not interchangeable. Make sure you tell the breaker whether your car is a 3-door or 5-door as well as the side you need (NS for passenger/left, OS for driver/right). Getting both details right is essential before any purchase.

Trim level does not change the fundamental fitment of a door card on the Panda — the panel shape is determined by generation, door count, and side (NS or OS), not whether the car is an Active, Dynamic, or Eleganza. You may find cosmetic differences such as fabric texture or finish between trim grades, but the card will physically fit regardless. If the colour or finish doesn't match, a breaker or trimmer can advise on refurbishing the surface.

This spans the generation boundary between the second-generation Panda (2003–2012) and the third-generation Panda (2012 onwards), and these cars have different body structures, so fitment across this boundary is unlikely. You should confirm the exact generation of both donor and recipient vehicles with the breaker using both registrations before purchasing. Do not assume a card from either side of this boundary will fit the other.

No — the engine has no bearing on door card fitment for the Panda. What matters is the generation, whether the car is a 3-door or 5-door, and the side required (NS for nearside/passenger, OS for offside/driver). Confirm those three details with the breaker and the engine can be disregarded entirely.