Second Hand Fiat Fullback Washer Pump

Yes, the Fiat Fullback is a pick-up truck that was sold in the UK from around 2016 to 2019, and it was fitted with a windscreen washer system including a washer pump as standard across its variants. The Fullback was a rebadged Mitsubishi L200 (fourth generation), so the washer pump is a genuine part of the vehicle. If you're searching for a used one, UK breakers who deal in Mitsubishi L200 parts from the same era may also be able to help, as the underlying vehicle is mechanically very closely related.

The Fiat Fullback was only produced for the UK market from approximately 2016 to 2019, covering a single generation throughout its short run, so a pump from a 2016 model should be directly compatible with a 2018 model. There were no significant mid-life facelifts to the washer pump system during this period. That said, confirm the part number with the breaker against your registration before purchasing, as minor production changes can sometimes occur without being widely documented.

Trim level does not affect washer pump fitment on the Fiat Fullback - the pump is part of the core vehicle system and is the same regardless of whether your truck is an entry-level or higher-spec variant. You may find cosmetic differences around the washer bottle or bonnet area between trims, but the pump itself is the same unit. Simply confirm your model year with the breaker and the part should interchange across all trim levels.

This is very likely to be the case, as the Fiat Fullback was built on the Mitsubishi L200 fourth-generation platform and shares a very high degree of mechanical commonality with it. Breakers who stock fourth-generation L200 parts (roughly 2015 onwards for that generation) are often the best source for Fullback parts given how few Fullbacks were sold in the UK. Confirm with the breaker that the part numbers match or that they can verify fitment against your Fullback's registration before buying.

On most vehicles the front and rear washer pumps are separate units, and this is generally the case on the Fullback too - the front pump feeds the windscreen jets and the rear pump (if a rear wash-wipe is fitted) feeds the rear window. Make sure you tell the breaker whether you need the front or rear pump, as they are not interchangeable. If you're unsure which one has failed, a breaker can often advise once they know your symptoms.

Give the breaker your full registration number and ask them to confirm the part against it - this is the most reliable way to ensure compatibility. It's also worth asking whether the pump comes from a like-for-like Fullback or a Mitsubishi L200 of the same generation, as either should be suitable. Used washer pumps are generally low-risk secondhand parts, but always check the connector and pipe fittings match your existing unit before fitting.