Get quotes for a used or replacement BMW X3 fog light. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used fog lights vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Front fog lights were fitted to many X3 variants across all generations, but they were not standard on every trim level — some lower-spec models were sold without them, meaning the bumper may have a blank where the fog light would sit. If you are unsure whether your X3 originally had fog lights fitted, check your V5C or ask a BMW dealer to confirm against your registration before ordering. A breaker can also check whether the bumper on the car they are dismantling carries fog lights.
The E83 X3 ran from 2003 to 2010 and received a facelift in 2006, which brought updated front bumpers and light units, so early (2003–2006) and late (2006–2010) fog lights are not the same. You need to match your car to the correct facelift period — pre-facelift to pre-facelift, or post-facelift to post-facelift. Confirm with the breaker against your registration to make sure the part they have is from the right phase.
The F25 X3 ran from 2010 to 2017 and was facelifted in 2014, which included changes to the front bumper styling and light clusters, so the fog light housings from either side of that boundary may not be interchangeable. Name the boundary confidently — 2014 — but whether the actual fog light unit crosses it depends on the specific part, so confirm with the breaker against your registration before buying. Stick to the same facelift phase where possible to avoid fitment issues.
No — the F25 (2010–2017) and G01 (2017 onwards) are entirely different generations with different front-end designs, so their fog lights are not compatible. Always match the generation first, then the facelift period within that generation. A breaker will be able to confirm the correct part for your registration.
No — the drivetrain layout (xDrive four-wheel drive or sDrive rear-wheel drive) does not affect which fog light fits, as the front-end panels are shared across drivetrain variants within the same generation and facelift period. What matters is the generation (E83, F25, or G01) and whether your car is pre- or post-facelift. Focus on those two factors and confirm against your registration with the breaker.
Trim level does not change the fundamental fitment of the fog light unit, as front-end panels are shared across trims within the same generation and facelift phase. However, M Sport bumpers can have a different surround or bezel styling compared with SE or xLine, so the fog light trim ring or housing may look slightly different even if the bulb and fitting are the same. It is worth mentioning your trim to the breaker so they can supply a unit that matches your bumper's appearance.