Findapart

Alfa Romeo Brera Alloy Wheels Replacement Parts

Need a used Alfa Romeo Brera alloy wheels? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Alfa Romeo Brera alloy wheels: what matters

Fitment on a used alloy wheels varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Alfa Romeo Brera parts

Used alloy wheels for other Alfa Romeo models

Fitment questions

What years does the Alfa Romeo Brera cover, and are all years interchangeable for alloy wheels?

The Alfa Romeo Brera was produced from 2005 to 2010 as a single generation with no major facelift that changed the wheel fitment specification. All Brera alloys share a 5x110 PCD and a 65.1mm centre bore, so wheels from a 2005 car can generally fit a 2010 car provided the offset also matches. Always confirm the exact offset of the specific set you are buying with the breaker against your registration to be sure.

Will Alfa Romeo 159 alloys fit my Alfa Romeo Brera?

The 159 and Brera share the same 5x110 PCD and 65.1mm centre bore, which is why wheels from one are often swapped onto the other. Offset can vary between individual wheel designs across the two models, so check the offset stamped on the wheel against what your Brera requires before buying. Confirm compatibility with the breaker against your registration, and bear in mind that TPMS sensor compatibility is a separate question to route to the breaker too.

Does trim level affect which alloy wheels will fit my Brera — for example, does a wheel from a lower-spec car fit an S trim?

Trim level does not affect the fundamental fitment of alloy wheels on the Brera — the PCD, centre bore, and offset are what matter, not whether the wheel came from a base-spec or S-trim car. Different trim levels were offered with different alloy designs, so a wheel sourced from a lower-spec Brera may look different to the original on your car, but it will bolt on if the offset matches. Confirm the offset of the specific wheels with the breaker, and expect a cosmetic difference if mixing designs from different trim levels.

Will alloys from a 2005 Brera fit a 2009 Brera?

Yes, the Brera ran as a single generation from 2005 to 2010 without a significant structural revision that altered the wheel fitment parameters, so a 2005 wheel and a 2009 wheel share the same 5x110 PCD and 65.1mm centre bore. Provided the offset of the specific wheels matches, fitment should be straightforward. Confirm the offset with the breaker against your registration before purchasing.

Can I use alloys from an Alfa Romeo Spider (939) on my Brera?

The Alfa Romeo Spider of the same era (known internally as the 939 series) was built on the same platform as the Brera and shares the 5x110 PCD and 65.1mm centre bore, making cross-fitment common. Offset can differ between specific wheel designs, so confirm the offset of the exact set with the breaker against your Brera's registration. TPMS sensor compatibility is a separate matter and should also be checked with the breaker.

Does the engine in my Brera — for example, 2.2 JTS versus 3.2 V6 — affect which alloy wheels will fit?

No, the engine fitted to your Brera has no bearing on alloy wheel fitment — what matters is the PCD, offset, and centre bore, all of which are consistent across the Brera range regardless of engine. You can safely source alloys from a 2.2 JTS car for a 3.2 V6 car, or vice versa, as long as the offset matches. Confirm the offset of the specific wheels with the breaker against your registration before buying.