Findapart

Alfa Romeo Brera Body Control Module Replacement Parts

Compare prices on a used Alfa Romeo Brera body control module from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Alfa Romeo Brera body control module

No two body control modules are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Alfa Romeo Brera parts

Used body control module for other Alfa Romeo models

Fitment questions

Does the Alfa Romeo Brera have a Body Control Module?

Yes, the Alfa Romeo Brera (2005–2010) is fitted with a Body Control Module (BCM), which manages a range of electrical functions including lighting, windows, central locking, and alarm systems. It is present across the Brera range regardless of engine variant. If you are searching for a used unit, a breaker will need your exact registration to pull the correct part.

Will a Body Control Module from a 2006 Brera fit a 2009 Brera?

The Alfa Romeo Brera was produced from 2005 to 2010 as a single generation with a mild facelift around 2007–2008, and BCMs can be sensitive to software revisions introduced across that period. A unit from a 2006 car may not be directly plug-and-play in a 2009 car without reprogramming, and compatibility can depend on the exact build specification. We'd strongly recommend confirming with the breaker against both registrations before purchasing.

Does the engine choice affect which Body Control Module I need for my Brera?

Engine variant can influence BCM specification on the Brera, as the module communicates with engine management and transmission systems, meaning a 2.2 JTS petrol, 3.2 V6, or 2.4 JTDm diesel may each require a differently configured unit. Unlike some purely passive parts, a BCM is not simply interchangeable across all engine variants. Always give the breaker your full registration so they can match the correct unit.

Does trim level affect which Body Control Module I need — for example, does a Brera S need a different unit than a standard Brera?

Trim level can genuinely affect BCM specification on the Brera, because the module controls features that vary between trim levels — such as whether the car has bi-xenon headlights, sports suspension settings, or specific comfort features fitted to the Brera S. Unlike alloys or some mechanical parts where trim makes no difference, here a BCM from a lower-spec car may lack the coding for features present on a higher-spec variant. Confirm with the breaker that the donor car's trim and options match yours as closely as possible.

Does the Body Control Module need programming after fitting a used unit from a breaker?

In most cases, yes — a used BCM from a breaker will typically need to be programmed or coded to your specific Brera using Alfa Romeo diagnostic equipment (such as Examiner or a compatible aftermarket tool). Without correct programming the module may not communicate properly with the rest of the car's systems, leaving faults or functions inoperative. Factor in the cost of programming by an Alfa specialist or auto-electrician when budgeting for the repair.

Can I use a Body Control Module from another Alfa Romeo model — such as a 159 or Spider — in my Brera?

The Alfa Romeo 159 and Brera share a platform and some electrical architecture, and in some cases BCMs have been swapped between them, but this is not a straightforward like-for-like swap and depends heavily on build date, engine, and specification. The Spider (a convertible variant sharing the Brera's underpinnings) may be a closer match, but any cross-model use still requires professional programming and carries a risk of incompatibility. Route this question to the breaker with both registrations, and confirm with an Alfa specialist before committing.