Cheap Alfa Romeo 147 Tyre

The Alfa Romeo 147 ran from 2000 to 2010, with a facelift arriving in 2004, but tyre fitment is determined by the wheel rim size and offset rather than the generation or facelift date. As long as the rim dimensions and offset match, a tyre sized for a pre-facelift 147 will fit a post-facelift car, but you should confirm the exact tyre size printed on your door sill or existing tyres before ordering. Check the size markings carefully as different trim levels and engine variants across the range were optionally fitted with different wheel sizes.

Engine size can influence the wheel and tyre package fitted as standard, since larger-engined 147 variants such as the 3.2 GTA were equipped with wider, larger-diameter wheels than the entry-level 1.4 and 1.6 models. This means the tyre size from a GTA is unlikely to match a standard 147 unless you have also changed the wheels. Always check the actual tyre size on the sidewall of your existing tyre rather than assuming based on engine size alone.

Trim level on the Alfa Romeo 147 does not in itself determine tyre fitment - what matters is the rim size the car was fitted with, which can vary between trim levels if different wheel options were specified. If a Collezione or Lusso example was fitted with the same size alloys as your car, the tyre size will be identical. Check the tyre sidewall markings on both cars to confirm the size matches before purchasing from a breaker.

The 147 GTA used a 3.2-litre V6 engine and was fitted with significantly larger wheels and wider tyres than the standard 147 range, so in most cases the tyre sizes will not match. Unless your standard 147 has been fitted with aftermarket wheels matching the GTA specification, a GTA tyre is unlikely to be a direct fit. Confirm the tyre size printed on your existing tyre sidewall and pass this to the breaker when requesting a quote.

For most conventional tyres, the side of the car the tyre came from does not affect fitment, as tyres are generally not side-specific unless they are unidirectional or asymmetric designs. If a tyre has a directional tread pattern, it must be mounted on the correct side to rotate the right way, but this is a fitting consideration rather than a sourcing one. Check the sidewall of the tyre for any directional or asymmetric markings and let your fitter know when having it mounted.

The correct tyre size for your 147 depends on the wheel rim it is fitted with, and the 147 was offered with a range of wheel sizes across its 2000 to 2010 production run. The size you need is printed on the sidewall of your existing tyres, for example 195/55 R15 or 205/45 R16, and you should quote this exactly when contacting a breaker. Confirm the size, load rating, and speed rating with the breaker against your registration to make sure the used tyre meets your car's requirements.