Cheap Volkswagen Crafter Tyre

The first-generation Crafter ran from 2006 to 2016, while the second-generation Crafter launched in 2017, so a 2015 and a 2019 are from entirely different generations with different wheel and tyre specifications. Tyre fitment depends on the rim size and offset fitted to your specific van, which can vary by payload rating and GVW even within a generation, so you cannot assume the sizes match across that generational boundary. Always check your tyre placard or door-pillar plate for the correct size before ordering, and confirm with the breaker that the rim dimensions match your registration.

Yes, all variants of the Volkswagen Crafter — van, minibus, chassis cab and dropside — were fitted with tyres as standard, so sourcing a used tyre or a tyre-and-wheel combination from a breaker is entirely possible. Bear in mind that breakers typically sell the steel or alloy wheel with the tyre still mounted, which can be a cost-effective way to get a matching spare or replacement. Make sure you quote your registration and check the tyre size printed on your existing tyres before contacting a breaker.

Trim level on the Crafter does not directly determine tyre size; what matters far more is the payload and GVW rating of your specific van, since heavier-rated variants can be fitted with different wheel sizes or load-rated tyres. CR30 and CR35 refer to gross vehicle weight classes rather than luxury trims, and these weight ratings can influence the tyre specification, so they are worth checking. Confirm the exact tyre size from the placard on your van's door pillar or fuel-filler flap and share that with the breaker rather than relying on trim name alone.

Both a 2010 and a 2013 Crafter fall within the first generation, which spanned 2006 to 2016, so you are within the same generation and the rim and tyre sizes are more likely to correspond. However, payload rating and GVW class can result in different load-rated tyres or even different rim widths being fitted to vans from the same year, so the generation match alone does not guarantee the tyre size is identical. Check the tyre size printed on your sidewall and the wheel rim dimensions, and confirm the match with the breaker against your registration.

A 2016 Crafter is a first-generation van, while your 2018 model is second-generation, as the new platform launched in 2017, so you are looking across a significant generational boundary with different underpinnings and potentially different wheel specifications. Whether a specific tyre or wheel-and-tyre combination crosses that boundary is something you must confirm with the breaker against your registration rather than assume. Provide the breaker with the tyre size from your sidewall and your GVW rating so they can check compatibility properly.

Engine size itself does not directly determine tyre size on the Crafter; the more relevant factors are the GVW rating, axle load, and the rim specification fitted to your van. That said, payload and GVW variants can coincide with different trim and equipment levels that may carry different wheel sizes, so it is worth double-checking rather than assuming all Crafters of the same year share a tyre size. Quote your registration and the tyre size from your sidewall to the breaker to make sure you get the correct match.