Compare prices on a used Volkswagen Crafter washer pump from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used washer pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Crafter has been produced in two main generations: the first generation ran from 2006 to 2016, and the second generation launched in 2017 onwards. Washer pumps are generally generation-specific, so a pump from a 2006–2016 Crafter is unlikely to be a straight swap onto a 2017-onwards van without checking connector and fitting compatibility. If your van sits near that 2016–2017 boundary, confirm with the breaker against your registration before buying.
Both the 2010 and 2014 Crafter fall within the first-generation range (2006–2016), so the washer pump is likely to be compatible between these years. That said, there were running production changes across this generation, so always give the breaker your full registration to verify the part number matches before committing.
No — the washer pump is a bodywork ancillary and is not dependent on whether your Crafter has a 2.0-litre or 2.5-litre engine, or any other engine variant. You don't need to worry about matching engine specs when sourcing this part; generation and body configuration are what matter.
The 2017 second-generation Crafter was an entirely new platform developed in-house by Volkswagen, replacing the Mercedes Sprinter-based first generation, so parts compatibility across that 2016–2017 boundary is very unlikely. A pump from a 2018 van should be sourced from a second-generation (2017-onwards) Crafter. Confirm with the breaker against your registration to be sure of an exact match.
No — trim level does not affect washer pump fitment on the Crafter, whether your van is a base, Startline, Trendline, or Highline specification. The washer pump is the same unit regardless of trim; the only differences between trim levels are cosmetic or interior-related. Any cosmetic differences on the used part, such as minor bracket variations, won't affect whether it functions correctly.
Yes — if your Crafter is fitted with a rear wash-wipe system, the front and rear pumps are separate units, though they typically share the same washer reservoir. When ordering from a breaker, specify whether you need the front or rear pump, and confirm your van actually has a rear wash-wipe fitted, as not all Crafter variants were equipped with one.