Volkswagen Arteon Curtain Airbag Replacement Parts

The Arteon was updated with a significant facelift in 2020, creating a clear generation boundary, and whether a curtain airbag from a pre-2020 car will interchange with a post-2020 car is something you should confirm with the breaker against your registration before ordering. Within the same generation — pre-facelift (2017–2020) or post-facelift (2020 onwards) — there is a much stronger chance of compatibility, but airbags are safety-critical and the breaker should verify the part number against your car's SRS system. Never fit a used curtain airbag without professional installation.

Yes, curtain airbags are fitted across the Volkswagen Arteon range as standard — they run along the roofline on each side of the cabin to protect occupants' heads in a side-impact or rollover. The Arteon is a five-door liftback (and later Shooting Brake), so curtain airbags are present on both driver's side (OS) and passenger's side (NS). Because they are safety-critical single-use components, a replacement must be sourced carefully and always fitted by a qualified professional.

For the curtain airbag itself, trim level — whether SE, SE Navigation, Elegance, R-Line, or R-Line Edition — is not expected to affect fitment, as the curtain airbag assembly runs along the roofline and is not directly dependent on seat specification or interior trim grade. You should still confirm the part number with the breaker against your registration, as airbag module compatibility with your specific SRS system is something only the breaker or a technician can reliably verify. Professional fitting is essential regardless of trim source.

No — OS (driver's side, right in the UK) and NS (passenger's side, left in the UK) curtain airbags are handed and are not interchangeable, as each is shaped to deploy along its specific side of the roofline. Always make sure you specify the correct side when requesting a quote from a breaker. Fitting the wrong side is a serious safety risk, so double-check this with both the breaker and the technician carrying out the installation.

The 2020 facelift introduced changes to the Arteon's interior and safety systems, so a curtain airbag from a pre-facelift car (2017–2020) crossing into a post-facelift car (2020 onwards) should not be assumed to be a straight swap. You must confirm compatibility with the breaker using your exact registration, as airbag module compatibility with the specific SRS system is something we cannot state as fact here. Curtain airbags are safety-critical and single-use after deployment, so professional fitting and proper verification are non-negotiable.

The Arteon Shooting Brake (introduced as part of the 2020 facelift range) has a different roofline and body structure to the standard five-door liftback, which means the curtain airbag assemblies are unlikely to be the same part. When sourcing from a breaker, make sure you specify whether your car is the standard Arteon liftback or the Shooting Brake, as well as the side required (NS or OS). As with all airbag replacements, professional fitting is essential and the breaker should verify the part against your registration.