Vauxhall Vivaro Wheel Hub Replacement Parts

Both years fall within the first-generation Vivaro (B-series, roughly 2001–2014), so they share the same basic platform and wheel hub design. However, Vauxhall made running-gear revisions during that generation, and whether a hub from 2010 directly swaps onto a 2008 vehicle can depend on your van's GVW rating and brake specification — confirm the part number with the breaker against your registration before buying.

No — the Vivaro C (2019 onwards) moved to a completely different platform compared to the Vivaro B (2001–2014) and its successor the Vivaro (2014–2019), so the hub geometry, bearing carriers, and brake interfaces are not shared across that generation boundary. Always source a hub from the same generation as your van, and confirm the exact year and GVW with the breaker to ensure compatibility.

Trim level itself does not determine hub fitment on the Vivaro; what matters is the generation, the GVW/payload rating shown on your van's VIN plate, and the engine size, because heavier or more powerful variants may run larger brake assemblies with a different hub specification. A Sportive or Sport badge is a trim and equipment distinction rather than a structural one, so don't rule out a hub from a differently-badged Vivaro of the same year and payload class — just verify the GVW and engine match with the breaker.

It can, because larger or more powerful engines are sometimes paired with uprated brakes that use a different hub to accommodate a bigger disc and caliper. If your Vivaro runs a 2.0-litre engine versus a 1.6-litre unit, it is worth checking whether the brake specification differs before assuming any same-generation hub will fit. Confirm the engine size and GVW alongside the registration with the breaker to make sure you are matched to the right hub.

The second-generation Vivaro ran from 2014 to 2019, so both 2014 and 2016 are within the same generation and the hubs are likely to be compatible in principle. That said, early production 2014 vans sat on the cusp of the generation change, and payload variants within the range can carry different brake and hub specifications, so confirm the GVW rating on your VIN plate and the exact part number with the breaker before purchasing.

Yes — wheel hubs are handed on the Vivaro, meaning the nearside (NS, kerb side) and offside (OS, driver's side) hubs are not interchangeable due to the ABS sensor port orientation and, on some variants, differing bearing arrangements. Always tell the breaker which side you need, and double-check by quoting your registration so they can pull the correct part for your specific vehicle.