Get quotes for a used or replacement Vauxhall Rascal timing chain. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two timing chains are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
No — the Vauxhall Rascal (produced from 1986 to 1990) used engines that were driven by a timing belt (cambelt), not a timing chain, so a timing chain is not a part that exists on this vehicle. If you need a timing component for your Rascal, you should be searching for a timing belt kit, which typically includes the belt, tensioner, and idler pulley. Confirm the exact kit required with the breaker against your registration and engine code, as there were different engine variants fitted across the production run.
It's unlikely — the Rascal used belt-driven engines rather than chain-driven ones, so any timing chain listed for a Vauxhall van will almost certainly relate to a different model such as the later Movano or Vivaro, which used entirely different engine families. Fitting a timing chain to an engine designed for a belt is not possible, as the two systems are mechanically incompatible. If you're not sure which timing component your Rascal needs, check your V5 or run a VIN check to confirm the engine code and share it with the breaker.
You should be searching for a timing belt (also called a cambelt) rather than a timing chain, as that is what the Rascal's engines used to drive the camshaft. Depending on your engine code, you may also need associated components such as the tensioner pulley or water pump, which are often replaced at the same time. Give your engine code to the breaker so they can match the correct belt specification to your engine variant.
Yes — engine code is the most important detail when sourcing any timing component, and you should check your V5 or obtain a VIN check to confirm it before approaching a breaker. The Rascal was available with different engine options across its production run, and the timing belt specification can vary between them. Always supply the engine code directly to the breaker rather than relying on the year or body style alone.
No — trim level has no bearing on which timing belt your Rascal requires, as the belt is determined entirely by the engine fitted, not by specification or equipment level. What matters is your engine code, which you can find on your V5 or via a VIN check. Pass that code to the breaker and they will be able to identify the correct belt for your vehicle.