Findapart

Used Vauxhall Adam Timing Chain

Compare prices on a used Vauxhall Adam timing chain from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Vauxhall Adam timing chain: what matters

Fitment on a used timing chain varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Vauxhall Adam parts

Used timing chain for other Vauxhall models

Fitment questions

Does the Vauxhall Adam actually have a timing chain, or does it use a belt?

It depends on the engine fitted to your Adam. The 1.0-litre turbocharged ECOTEC petrol engine (engine code B10XFT) uses a timing chain, as does the 1.2-litre naturally aspirated engine (A12XEL/A12XER family); the 1.4-litre naturally aspirated engine (A14XEL/A14XER) also uses a chain rather than a belt. All Adam engines across the 2013–2019 production run are chain-driven, so a timing chain is a genuine part on this model.

Will a timing chain from a 2014 Adam fit my 2017 Adam?

The Adam was produced from 2013 to 2019 as a single generation with no major platform change, but whether a chain from one car fits another depends on the engine code, not the year. If both cars share the same engine code — for example both are B10XFT 1.0 turbos or both are A14XEL 1.4s — fitment is far more likely, but you should confirm with the breaker against your exact registration as there can be running changes to ancillary components mid-production. Never assume year alone is a sufficient match.

Does the trim level affect which timing chain I need — will a chain from an Adam Glam fit an Adam Slam or Jam?

Trim level makes no difference to timing chain fitment on the Adam — the Glam, Jam, Slam, and any other trim designation are purely cosmetic and equipment distinctions, and the chain is determined entirely by the engine fitted. Check the engine code on your V5C or run a VIN check, and give that code to the breaker rather than the trim name. A chain from a Slam with the same engine code as your Jam is mechanically the same part.

I have a 1.0 turbo Adam — does it definitely have a timing chain and will one from another 1.0 turbo Adam fit?

Yes, the 1.0-litre turbocharged Adam (engine code B10XFT) is chain-driven, so a timing chain is a real part on your car. A chain from another B10XFT-engined vehicle — whether another Adam or a compatible Vauxhall platform-mate — is likely to be the correct match, but confirm the full engine code with the breaker against your registration to rule out any mid-run specification changes.

Can I use a timing chain from a Vauxhall Corsa or Agila on my Adam?

The Adam shares engines and architecture with other Vauxhall small cars, so cross-model fitment is possible where the engine code is identical — for example a B10XFT from a compatible Corsa may share the same chain. However, confirming cross-model compatibility is something you must do with the breaker using both registration numbers, as ancillary components and tensioner arrangements can vary even when the base chain appears the same. Give the breaker both engine codes and let them verify before purchasing.

Does the year of manufacture matter when buying a second-hand Adam timing chain, given the car only ran from 2013 to 2019?

The Adam's relatively short and single-generation production run means year is less critical than engine code, but it is still worth supplying your exact registration to the breaker because minor specification updates can occur across a production run without a formal facelift. Engine code is the primary fitment guide — get it from your V5C or a VIN check and quote it to the breaker alongside your year and mileage so they can source the closest match.