Second Hand Vauxhall Movano Brake Caliper
Get quotes for a used or replacement Vauxhall Movano brake caliper. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Vauxhall Movano brake caliper
Used brake calipers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's front or rear, left or right
Other used Vauxhall Movano parts
- Used Vauxhall Movano Steering Column
- Used Vauxhall Movano Wheel Hub
- Used Vauxhall Movano Handbrake Cable
- Used Vauxhall Movano CV Joints
- Used Vauxhall Movano Sump
- Used Vauxhall Movano Aerial
- Used Vauxhall Movano Door
- Used Vauxhall Movano Engine Wiring Loom
- Used Vauxhall Movano Brake Discs
- Used Vauxhall Movano Seat Belt
- Used Vauxhall Movano Throttle Body
- Used Vauxhall Movano Fuel Injection Pump
Used brake caliper for other Vauxhall models
Fitment questions
Does a brake caliper from a first-generation Movano fit a second-generation Movano?
The Movano runs in two main generations: the first generation (1998–2010) and the second generation (2010 onwards, sometimes called the X62), and these are entirely different vehicles with different braking systems, so calipers do not cross between generations. Even within a generation there are fitment variables such as GVW rating and engine size, so always confirm the exact part against your registration with the breaker.
Will a Movano brake caliper from a 2008 fit a 2012 Movano?
A 2008 Movano is first generation and a 2012 is second generation, so the two share no common caliper and the parts will not interchange. You need to source a caliper specifically from the second-generation (2010-onwards) Movano, and even then the breaker will need your GVW rating and axle details to confirm the right unit.
Does the GVW or payload rating affect which brake caliper a Movano needs?
Yes, this is one of the most important fitment factors on the Movano — heavier-rated vans (for example 3.5-tonne versus lighter variants) often run larger braking systems to cope with the extra load, so a caliper from a lighter-rated van may not be correct for a higher-GVW vehicle. Always check the plate on your van for the exact GVW figure and pass this to the breaker alongside your registration.
Does trim level affect which brake caliper a Movano needs?
Movano trim levels — such as L1H1, L2H2 and so on — refer to body length and roof height rather than equipment grades, and trim designation alone does not determine which caliper you need. What actually matters is the axle (front or rear), the GVW rating, the engine size, and the generation, so focus on those details when speaking to the breaker.
Does engine size matter when buying a used Movano brake caliper?
Yes, engine size can influence brake specification on the Movano — larger or higher-output engines are sometimes paired with uprated brakes to match their performance and load capacity. Give the breaker your exact engine size alongside the GVW and your registration to make sure the caliper matches your van's setup.
Does it matter whether I need the nearside or offside Movano brake caliper?
Yes, front brake calipers are handed — nearside (NS, left) and offside (OS, right) are mirror images of each other and are not interchangeable, so always specify which side you need when contacting the breaker. Rear calipers on the Movano may also be handed depending on the variant, so confirm this with the breaker against your registration to avoid ordering the wrong unit.