Second Hand Vauxhall Insignia Brake Caliper
Get quotes for a used or replacement Vauxhall Insignia brake caliper. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Vauxhall Insignia brake caliper
No two brake calipers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's front or rear, left or right
Other used Vauxhall Insignia parts
- Used Vauxhall Insignia Brake
- Used Vauxhall Insignia ABS Pump
- Used Vauxhall Insignia Wheel Trims
- Used Vauxhall Insignia Steering Wheel
- Used Vauxhall Insignia Wheel Hub
- Used Vauxhall Insignia Fuel Injection Pump
- Used Vauxhall Insignia Timing Chain
- Used Vauxhall Insignia Water Pump
- Used Vauxhall Insignia Sunroof
- Used Vauxhall Insignia Dashboard
- Used Vauxhall Insignia Bulkhead
- Used Vauxhall Insignia Spoiler
Used brake caliper for other Vauxhall models
Fitment questions
Will a brake caliper from a 2010 Insignia fit my 2014 model?
The Vauxhall Insignia ran as a single generation (Mk1) from 2008 to 2017, with a facelift arriving around 2013-2014, so a 2010 and a 2014 are both Mk1 cars — however, whether the caliper crosses that facelift boundary cleanly depends on engine size and whether Vauxhall made any brake specification changes mid-generation, so confirm the exact compatibility with the breaker against both registrations before buying.
Does it matter which engine my Insignia has when buying a used brake caliper?
Yes, engine size does affect brake specification on the Insignia — larger or more powerful engines (such as the 2.0 BiTurbo diesel) were typically fitted with bigger brakes than smaller-engined variants, so a caliper from a 1.6 petrol car is unlikely to match a 2.0 CDTi or BiTurbo model correctly. Always tell the breaker your engine size as well as your registration so they can pull the right part.
Does the trim level affect which brake caliper I need — for example, does an SRi need a different caliper to an SE?
Trim level alone does not determine brake caliper fitment on the Insignia — what matters is the engine size and the generation of the car, not whether the badge says SE, SRi, Design, or Elite. Bear in mind that higher trims sometimes came with larger-diameter wheels and may have been optioned with bigger brakes, but this follows the engine and brake package rather than the trim name itself, so verify against your registration with the breaker rather than relying on trim alone.
Do I need to tell the breaker which side the caliper is from?
Yes, absolutely — brake calipers are handed, meaning the nearside (NS, passenger side) and offside (OS, driver side) are not interchangeable. Always specify NS or OS when requesting a quote, and double-check the caliper you receive matches the side you need before fitting.
Will a Mk1 Insignia caliper fit the Mk2 (post-2017) Insignia?
The Insignia moved to a new Mk2 platform when it was relaunched in 2017, and the two generations are not the same car underneath, so a Mk1 caliper (2008-2017) is very unlikely to fit a Mk2 model without modification. Treat these as separate cars when searching, and ask the breaker to confirm fitment against your specific registration.
Are there any Vauxhall Insignia variants that don't have brake calipers?
No — brake calipers are fitted to all Vauxhall Insignia variants, including petrol, diesel, front-wheel-drive and four-wheel-drive (4x4) FlexRide models, on both front and rear axles. The specification of the caliper does vary between variants as noted above, but the part itself exists across the entire Insignia range.