Second Hand Vauxhall Mokka Wheel Trims

The Vauxhall Mokka was fitted with wheel trims on steel wheels, typically in 16-inch or 17-inch sizes depending on the trim level and generation, so you need to match the diameter to your existing steel wheels. Check the size stamped on your steel wheel or tyre sidewall before ordering, as fitting the wrong diameter will mean the trim either won't clip on or will fall off. Always confirm the exact size with the breaker quoting against your registration.

The original Vauxhall Mokka ran from 2012 to 2016, with a facelift arriving around 2014, so a 2013 car is pre-facelift and a 2016 is post-facelift — both sit within the same first generation but either side of that update. Wheel trims clip onto the steel wheel itself, so fitment depends on the steel wheel diameter and the number and position of the clips rather than the facelift year, meaning there is a reasonable chance of compatibility. However, because Vauxhall can alter steel wheel profiles between facelifts, you should confirm against your registration with the breaker before buying.

The Mokka B, launched in 2021, is a completely different platform from the original Mokka A (2012–2019), so the two generations share no meaningful parts commonality. Steel wheel dimensions and clip arrangements are very likely to differ between the two, making cross-generation fitment unlikely. Stick to sourcing trims from the same Mokka generation as your car, and confirm the exact wheel size and clip pattern with the breaker.

Trim level — whether your car is an SE, Active, Elite, or any other grade — does not determine whether a wheel trim will fit, as fitment depends entirely on the steel wheel diameter and clip design. What trim level does affect is whether your car has steel wheels and trims at all, since higher-spec trims are more likely to have been supplied with alloy wheels from the factory. If your Mokka has steel wheels, trims of the correct diameter from any trim level should be interchangeable, though cosmetic design will vary between grades.

Engine size does not affect wheel trim fitment on the Mokka, as trims are cosmetic covers for steel wheels and the steel wheel specification is not driven by engine choice on this model. What matters is solely the diameter of your steel wheels — typically 16 or 17 inch — and the number of clips. Confirm the size with the breaker against your registration to make sure you get the correct fit.

Wheel trims are circular and symmetrical, so there is no NS (nearside) or OS (offside) distinction — a trim from any corner of the car will fit any other corner. Breakers will often sell them individually, which is useful if you have only lost or damaged one. Just ensure the replacement matches your steel wheel diameter and, ideally, the trim design of your remaining trims if appearance matters to you.