Vauxhall Grandland Wheel Trims Replacement Parts

Wheel trims (plastic covers that clip over steel wheels) do exist on the Grandland, but only on lower-spec trim levels that were supplied with steel wheels from the factory — typically entry-level grades such as SE. Higher trims like Elite, Ultimate, and GS Line came with alloy wheels as standard, so those cars never had wheel trims fitted. If your car has alloys, you are looking for alloy wheels rather than wheel trims.

The Grandland (badged Grandland X up to around 2021, then Grandland from 2022) received a significant refresh for the 2022 model year, which included updated styling and a new platform generation — this is a meaningful boundary for trim fitment because the wheel and trim sizes can differ between the two generations. Wheel trims are sized to match a specific steel wheel diameter (commonly 16-inch on entry models), so if both cars share the same steel wheel size you may get a physical fit, but the clip pattern and profile can still vary across that generational change. Confirm the exact wheel diameter and trim clip specification with the breaker against both registrations before buying.

For wheel trims specifically, engine size does not drive fitment the way it might for brakes or suspension — wheel trims are determined by the diameter and width of the steel wheel fitted, not by what is under the bonnet. What matters is confirming the steel wheel size on your car, which is most reliably checked on the tyre sidewall or the vehicle's V5 and door-jamb plate. Give the breaker your registration so they can match trim size and clip type accurately.

Trim level itself does not affect wheel trim fitment on the Grandland — what matters is whether the car has steel wheels and what size those steel wheels are, not the trim name badge. That said, it is worth noting that some trim grades were more likely to be ordered with optional alloys even if steel wheels were listed as standard, so the donor car's actual wheel type is worth verifying with the breaker. As long as the steel wheel diameter matches, trims from one lower-spec grade should physically fit another.

The Grandland X name was used up to around 2021, with the refreshed Grandland name adopted from 2022 onwards alongside a substantial model update, and this generation boundary is where fitment uncertainty sits. The steel wheel diameter may be the same across both, which would mean the trims clip on, but the profile depth and retaining clip arrangement can change between generations and could result in a poor or insecure fit. Always confirm the exact part against both registrations with the breaker rather than assuming the name change is purely cosmetic.

On Grandland models fitted with steel wheels, the most common size is 16-inch, which is typical for entry-level SE variants, but you should always verify the actual wheel size on your own car from the tyre sidewall (the number after the R, e.g. R16) before ordering. Wheel trims must match the steel wheel diameter exactly to clip on correctly — a 17-inch trim will not fit a 16-inch wheel and vice versa. Tell the breaker your registration and confirm the steel wheel size so they can supply the correct trim diameter and clip type.