Cheap Vauxhall Insignia Wiper Blades

The Insignia A ran from 2008 to 2017, with a facelift around 2013-2014, and the wiper blade arms and screen geometry did not change across that generation, so blades from a pre-facelift car will generally fit a post-facelift one. That said, blade length and attachment type should be confirmed against your registration with the breaker before buying, as individual build variations can occasionally differ. Always check the driver's (OS) and passenger's (NS) blade sizes match your own car.

No - the Insignia A (2008-2017) and Insignia B (2017 onwards) are entirely different generations with different body structures, so their wiper blades and arm attachments are not interchangeable. Make sure you tell the breaker which generation you have, and ideally confirm against your registration plate to be certain. Mixing parts between these two generations is a common mistake worth avoiding.

Trim level does not affect wiper blade fitment on the Insignia - the screen size and wiper arm geometry are the same across SE, SRi, Elite, Design and other trim variants within the same generation. You may find that some higher trims had heated washer jets or specific blade designs, but the physical blade size and fitting type remain consistent, so a set from a lower-spec car will fit. Confirm the generation and body style (saloon, hatchback or Sports Tourer estate) with the breaker, as these share the same front screen setup within a generation.

No - the Sports Tourer estate and hatchback variants of the Insignia have a rear wiper, whereas the saloon does not. If you drive a saloon and are looking for a rear wiper blade, it simply was not fitted to that body style, so you would need to confirm you have a hatchback or Sports Tourer. When buying from a breaker, make sure the rear blade and arm come from the matching body style to ensure correct fitment.

Both a 2016 and a 2012 Insignia fall within the Insignia A generation (2008-2017), so the wiper blades should be directly compatible as the screen and arm design remained consistent throughout that generation. It is still worth confirming blade lengths with the breaker against your registration, as front blade sizes can occasionally vary. This is a low-risk interchange, but a quick check costs nothing.

No - the engine type, whether diesel or petrol, and the engine size have no bearing on wiper blade fitment whatsoever. Wiper blades are determined by the generation and body style, not the drivetrain. So whether your Insignia is a 1.6 petrol or a 2.0 CDTi diesel, the blades from the same generation and body style will be compatible.