Vauxhall Grandland Drive Shaft Replacement Parts

The Grandland (sold in the UK from 2017 onwards) received a significant facelift in 2021, which introduced styling and some mechanical updates, so a shaft from the pre-facelift 2019 car is crossing a production boundary when fitted to a 2022 model. The critical factor is whether both cars share the same engine code and gearbox type — if they do, there is a reasonable chance of compatibility, but you should confirm with the breaker against both registrations before buying, as ancillary and mounting details can change at a facelift point.

Engine code matters above everything else for a drive shaft — a 1.2 petrol and a 1.5 diesel Grandland from the same year will not share the same shaft, and neither will a front-wheel-drive and an all-wheel-drive variant. Pull your engine code from your V5 logbook or a VIN check and pass it to the breaker alongside your registration; year alone is not a reliable guide. This is the single most useful detail you can supply when requesting a quote on Findapart.

Trim level — whether that is SE, Elite, Elite Nav, or Ultimate — does not affect drive shaft fitment; the shaft follows the engine, gearbox type, and driven axle, not the badge on the tailgate. What can differ between trims is cosmetic or electrical equipment, none of which is relevant here, though you may receive a shaft from a lower or higher trim car and that is perfectly fine mechanically. Always confirm engine code and gearbox type with the breaker rather than relying on trim matching.

Vauxhall rebranded the Grandland X to simply 'Grandland' from 2021 with the facelift, so the name change alone does not determine compatibility — what matters is the engine code, gearbox type (manual, automatic, or e-CVT on hybrid variants), and which axle the shaft is for (NS or OS, front or rear on AWD models). A shaft from a pre-facelift Grandland X and a post-2021 Grandland should be checked against both registrations by the breaker before you confirm the order.

No — petrol and diesel Grandlands use different engine and transmission packages, and the drive shaft specifications will differ accordingly; fuel type is one of the key fitment filters for this part. Always specify both your fuel type and your engine code (found on your V5 or via a VIN check) when getting quotes from breakers on Findapart, as this rules out mismatches quickly.

Yes, NS (nearside, passenger side) and OS (offside, driver side) drive shafts are different lengths and are not interchangeable, so you must specify which side you need when contacting a breaker. On front-wheel-drive Grandlands the two shafts are typically unequal in length due to the differential position, making it especially important to get this right alongside the engine code and gearbox type.