Vauxhall Adam Cylinder Head Replacement Parts

The Vauxhall Adam was produced as a single generation running from 2013 to 2019, so there is no major facelift creating a hard platform break across the range. That said, engine code is the critical factor above all else — a head from a matching engine code should be the right starting point, but ancillary and mounting changes can occur quietly mid-production, so always confirm with the breaker against your exact registration before buying.

Both years sit within the same 2013–2019 single-generation Adam, so there is no named facelift boundary between them to worry about. The engine code is the primary thing that must match — supply your registration or VIN to the breaker so they can verify the code and check for any mid-run changes to ancillaries or mountings that could affect the swap.

No — trim levels such as Jam, Glam, Slam, and Rocks do not affect which cylinder head you need, as this is a mechanical part determined entirely by the engine code. You may find heads pulled from different trims on the breaker's shelf, and cosmetic differences between donor cars are irrelevant to fitment. Always match on engine code first, and confirm with the breaker against your registration.

Yes, absolutely — petrol and diesel engines have entirely different cylinder heads and will not interchange, so you must make sure the donor part comes from the same fuel type as your car. Within petrol variants, different engine codes such as the 1.2 and 1.4 units used in the Adam will have their own specific heads, so matching the exact engine code is essential. Check your V5 or run a VIN check to confirm your engine code before approaching a breaker.

The gearbox itself — whether manual or automatic — does not directly change the cylinder head specification, as the head is matched to the engine rather than the transmission. However, always lead with your engine code when speaking to a breaker, as this single detail carries more weight than any other when confirming compatibility.

Your engine code is shown on your V5C registration document, and it can also be retrieved through a VIN check using your vehicle's 17-digit VIN — often found on a plate in the engine bay or on the driver's door sill. Providing this code directly to the breaker is the single most useful thing you can do, as it cuts through any uncertainty about year, trim, or specification differences within the Adam range.