Get quotes for a used or replacement Škoda Octavia water pump. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used water pump varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Octavia has run across four main generations: Mk1 (1997–2004), Mk2 (2004–2013, facelift 2008), Mk3 (2013–2020, facelift 2017), and Mk4 (2020–present), and water pumps are not shared across these generations. Even within a generation, fitment is driven primarily by engine code rather than the car's age or badge, so a pump from a 2015 car could fit a 2019 car if the engine codes match, but a 2015-to-2017 boundary crossing should be confirmed with the breaker against your registration. Always supply your engine code — found on your V5 or via a VIN check — when requesting a quote.
No — the Mk2 (2004–2013) and Mk3 (2013–2020) use different engine families and the water pumps are not interchangeable between generations. Even where engine displacements look similar, the underlying engine codes differ, so a pump designed for one generation will not suit the other. Give the breaker your exact engine code to make sure you get the right unit.
No — trim level does not affect water pump fitment on the Octavia; the pump follows the engine, not the trim badge. An S and an SE with the same engine code take the same pump, and the same applies to vRS models, though vRS variants typically use specific high-output engine codes such as the 2.0 TSI or 2.0 TDI that differ from the mainstream range. Tell the breaker your engine code and fuel type rather than your trim name, and fitment should be straightforward.
Yes, absolutely — petrol and diesel versions of the Octavia use entirely different engines and the water pumps are not interchangeable, even where the displacement sounds similar (for example, a 2.0 petrol and a 2.0 diesel are completely different engines). Always state your fuel type alongside your engine code when asking a breaker for a quote. The engine code is the most reliable identifier and removes any ambiguity.
The Mk3 Octavia was facelifted in 2017, and while many engine codes carried over across that facelift, there can be ancillary and mounting changes mid-production that affect whether a pre-facelift pump seats correctly on a post-facelift engine. Name the facelift boundary when contacting a breaker and ask them to confirm compatibility against your specific registration, as this is not something that can be guaranteed without checking the exact engine build date and specification. Your engine code is the best starting point for that conversation.
Engine size on its own is not reliable enough — two Octavias with the same displacement can have different engine codes and therefore different water pumps; for example, the 1.4 TSI has been produced in several variants with different internal specifications. The engine code (a two-to-four letter code stamped on the block and listed on your V5 or obtainable via a VIN check) is the single most useful detail you can give a breaker. Fuel type is also worth confirming, as it rules out a whole family of incompatible pumps immediately.