Compare prices on a used Škoda Felicia transfer box from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used transfer box varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
No — the Škoda Felicia was a front-wheel-drive only model throughout its entire production run (1994–2001), and it was never offered in a four-wheel-drive variant. A transfer box is a component found only on four-wheel-drive or part-time 4WD vehicles to split drive between front and rear axles, so the Felicia simply never had one fitted. If you have a Felicia and are chasing a drivetrain noise or fault, the part you may actually be looking for is the gearbox, a driveshaft (nearside or offside), or a differential — all of which are found on front-wheel-drive vehicles and are available from UK breakers.
Almost certainly, yes — because no Felicia left the factory with a transfer box, a breaker quoting one for this vehicle has likely misidentified the part. The most common mix-up is with the gearbox itself, which houses the final drive and differential on a front-wheel-drive car, or occasionally a driveshaft or CV joint assembly. Go back to the breaker with your engine code (found on your V5 or via a VIN check) and describe the symptom or the exact component you need, so they can quote the correct part.
For a Felicia, the relevant drivetrain parts are the manual or automatic gearbox (which contains the differential), the nearside and offside driveshafts, CV joints, and wheel bearings. Engine code is the single most important detail to supply to a breaker, as the Felicia used several different engines — including 1.3, 1.6 petrol and 1.9 diesel units — and gearbox compatibility follows the engine code above all else. Supplying your registration or VIN alongside the engine code will help any UK breaker find you the right match quickly.
No — the Felicia's floorpan, subframe, and drivetrain were designed entirely around front-wheel drive, with no provision for a rear propshaft, rear differential, or the structural mounting points a transfer box would require. Fitting a transfer box from a 4WD Octavia or similar would require extensive and non-standard engineering modifications that are not a practical used-parts solution. If you need a Felicia drivetrain component, stick to searching for the correct gearbox or driveshaft matched to your engine code.