Findapart

Used Škoda Felicia Glow Plugs

Need a used Škoda Felicia glow plugs? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Felicia glow plugs

No two glow plugss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Felicia parts

Used glow plugs for other Škoda models

Fitment questions

Do Škoda Felicia glow plugs exist – is the Felicia available with a diesel engine?

Yes, the Felicia was offered with a diesel engine, the 1.9 SDI (non-turbo diesel), which means glow plugs are a genuine fitment on diesel variants of this model. Petrol-engined Felicias (1.3, 1.6, and the 1.8 turbo used in the vRS-adjacent variants) do not have glow plugs at all, as petrol engines use spark plugs instead. If you have a petrol Felicia and think you need glow plugs, you almost certainly need spark plugs rather than glow plugs – confirm your fuel type from your V5 before ordering anything.

Will glow plugs from an earlier Felicia fit my later one – does the 1996–1998 car share the same plugs as a 1998–2001 car?

The Felicia ran from 1994 through to 2001, with a facelift arriving around 1998 that brought exterior and interior updates but did not change the 1.9 SDI engine fundamentally. Because glow plugs follow the engine code rather than the model year or facelift, plugs from a pre-facelift SDI and a post-facelift SDI are likely to be the same part, but ancillary or mounting changes mid-production can catch buyers out. Confirm with the breaker against your exact registration and engine code to be certain before buying.

Does the trim level affect which glow plugs I need for my Felicia – will LX or GLX plugs differ?

Trim level makes no difference whatsoever to glow plug fitment – the plugs are determined entirely by the engine code, not whether your car is a base, LX, GLX, or Estate. A 1.9 SDI in an LX uses exactly the same glow plugs as a 1.9 SDI in a GLX; you may find cosmetic differences between stripped and higher-spec cars when you go to fit them, but the plugs themselves are identical. Focus on confirming your engine code (found on your V5 or via a VIN check) rather than your trim level when speaking to a breaker.

How many glow plugs does the Felicia 1.9 SDI need, and does that affect what I order from a breaker?

The 1.9 SDI is a four-cylinder engine, so it uses four glow plugs in total – one per cylinder. When sourcing from a breaker, bear in mind that used glow plugs are often sold individually or as a set, so clarify with the breaker whether you are buying a full set of four or individual plugs. It is generally advisable to replace all four at the same time rather than mixing old and new, so a full set from a single dismantled vehicle is the most practical ask.

What engine code should I quote when asking a breaker for Felicia diesel glow plugs?

The engine code is the single most useful piece of information you can give a breaker – for the Felicia diesel this is the 1.9 SDI, and the specific engine code will be shown on your V5 logbook or can be identified through a VIN check. Quoting your registration alone is a reasonable starting point, but breakers will always verify against the engine code to ensure the correct plug type and specification. Have the code ready before you call or request a quote, as it avoids any ambiguity and speeds up the process significantly.

Can I fit glow plugs from a VW Polo or SEAT Ibiza 1.9 SDI onto my Felicia – do VAG engines share the same parts?

The Felicia's 1.9 SDI engine is a VAG group unit also used in other models of the same era including the VW Polo and SEAT Ibiza, and in many cases glow plugs do cross over between these platforms. However, confirming exact cross-compatibility is something you should do with the breaker against your specific engine code, as specification differences can exist between applications even within the same engine family. A good breaker will cross-reference your engine code against their stock and advise you accordingly – never assume fitment without that check.