Get quotes for a used or replacement Škoda Enyaq steering wheel airbag. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Enyaq (introduced in 2021) received a facelift in 2024, and interior components including airbag modules can differ across that boundary, so a pre-facelift (2021–2023) steering wheel airbag may not be a straight swap into a 2024 or later car. Confirm with the breaker that the donor part matches your exact registration, as airbag compatibility with the SRS control unit is something only they can verify against the specific vehicle. Steering wheel airbags are safety-critical single-use components, so professional fitting by a qualified technician is strongly recommended.
Trim level can affect the steering wheel design on the Enyaq – the vRS and Sportline models in particular use a sportier flat-bottomed wheel that may differ from those on SE or SE L variants, so the airbag module and surrounding assembly may not be interchangeable across all trims. Check with the breaker that the donor wheel's trim level matches yours before purchasing. As always, have the airbag fitted by a qualified professional given the safety-critical nature of the component.
The body style – standard SUV versus the Coupé variant – should not in itself affect the steering wheel airbag, as both share the same interior architecture and steering column. What matters more is the generation (pre-facelift 2021–2023 or facelift 2024 onwards) and the trim level, which influences which steering wheel was fitted. Confirm the donor part against your registration with the breaker to be sure.
The drivetrain – whether your Enyaq is front-wheel-drive or all-wheel-drive – does not affect the steering wheel airbag, as it is an interior component tied to the generation and trim, not the drivetrain layout. You can disregard the donor car's drivetrain when assessing suitability, but do make sure the generation and trim level align with your car. Confirm compatibility with the breaker against your registration, and always have airbag work carried out by a qualified technician.
Steering wheel airbags are safety-critical components and single-use once deployed, so professional fitting by a qualified technician is strongly recommended – DIY installation carries a serious risk of accidental deployment or of the airbag failing to deploy correctly in a collision. A garage will also be able to reset or check the SRS (airbag) system to confirm the new module is correctly recognised by your car's electronics. Never attempt to source or refit an airbag without ensuring the part is verified as compatible with your specific vehicle's SRS system.
Airbag module compatibility with a specific SRS control unit is not something that can be confirmed by generation and trim alone – this is a question to put directly to the breaker, who can check the donor car's details against your registration. As a starting point, make sure the part comes from the same generation of Enyaq (pre-facelift 2021–2023 or facelift 2024 on) and the same trim tier, as these are the key factors governing interior fitment. A qualified technician fitting the part will also be able to verify system compatibility using diagnostic equipment.