Peugeot 208 Windscreen Replacement Parts

The Peugeot 208 first generation ran from 2012 to 2019, so a 2013 and a 2016 car share the same generation and the glass shape is the same. However, you must check whether both screens have matching heating elements and ADAS camera or rain sensor brackets, as these features became more common on later first-gen cars and a mismatch will cause problems. Confirm the exact spec of the donor screen with the breaker against your registration before buying.

No — the second-generation Peugeot 208 launched in 2019 on a new platform and the windscreen is a different shape entirely, so first-gen screens (2012–2019) will not fit second-gen cars (2019 onwards). These are completely different generations and the parts are not interchangeable. Always confirm which generation a screen comes from with the breaker before purchasing.

Trim level — whether Active, Allure, GT Line, or any other — does not affect which windscreen fits your 208. What matters is the generation of the car and whether your screen has heated glass or an ADAS camera bracket fitted. Bear in mind a screen from a higher-spec car may have a camera bracket or heating elements your car doesn't use, or vice versa, so check those features match rather than worrying about trim names.

On second-generation 208s (2019 onwards) in particular, a bracket or housing is bonded near the top of the screen to hold a forward-facing camera used for lane-keep assist and automatic emergency braking. If your car has these driver-assistance features, the replacement screen must have a compatible bracket in the correct position, otherwise the system will not work or may not calibrate properly. Because bracket designs can vary even within a generation, confirm compatibility with the breaker using your registration number rather than assuming any like-for-like screen will do.

No — 2018 falls in the first generation (2012–2019) and 2020 falls in the second generation (2019 onwards), so these cars are on different platforms with different screen shapes and the glass will not interchange. This is one of the most common year-range mistakes buyers make with the 208 because the changeover happened partway through 2019. Make sure you confirm which generation the donor screen comes from with the breaker before agreeing a price.

Technically the glass may fit in terms of shape if the generation matches, but fitting an unheated screen to a car with a heated screen system means you will lose that function and the wiring connections may be left exposed or unused. It is generally better to source a like-for-like heated screen, and you should tell the breaker specifically that you need a heated unit when requesting a quote. Confirm with the breaker that the donor screen matches your heated or unheated spec before purchasing.