Get quotes for a used or replacement Nissan Vanette door hinge. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used door hinges vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
You'll need to confirm the generation of your Vanette, which side the hinge is for — NS (nearside, passenger left) or OS (offside, driver right) — and whether it's for a front hinged door or one of the rear/side doors, as the Vanette was offered in both panel van and minibus body styles with different door configurations. The Vanette ran across distinct generations broadly covering the C22 series (mid-1980s to early 1990s) and the C23 series (early 1990s to early 2000s), and hinges are not interchangeable between these generations. Engine choice does not affect door hinge fitment, so you don't need to worry about that when searching.
The C22 generation ran roughly from 1985 to 1994 and the C23 generation from around 1994 onwards, and these are distinct body shells with different door geometries, so hinges from a C22 are very unlikely to fit a C23. Even within the C23 generation there may be detail changes, so always confirm the exact year of both the donor and your own vehicle with the breaker using your registration. Never assume a hinge crossing that generation boundary will bolt straight on without checking.
Yes, this matters significantly — the minibus body style typically has multiple hinged passenger doors, while the panel van version may use a sliding side door rather than a hinged one, and these are entirely different assemblies. If your van has a sliding side door, you will not be looking for a door hinge for that aperture at all, as sliding doors use a roller and track system rather than hinges. Make sure you specify to the breaker exactly which door position the hinge is for and confirm your body style variant so they can locate the correct part.
No — door hinge fitment is determined by the generation, body style, and which door position and side (NS or OS) you need, not by trim level. Different trim grades on the Vanette did not use different door hinge designs, so a hinge from a higher or lower specification vehicle of the same generation and body style should be the same part. The hinge can be resprayed to match your vehicle's colour if needed, as colour is not a fitment consideration.
The Vanette, Serena, and Urvan are related but distinct vehicles with different body structures, and door hinges from these models are unlikely to be a direct swap despite the shared platform heritage in some cases. You should not assume cross-model compatibility — always provide your full registration to the breaker and ask them to verify against their stock before purchasing. Cross-referencing part numbers where possible is the safest approach.
Yes, side is critical — NS (nearside) is the passenger or left side, and OS (offside) is the driver or right side, and these hinges are handed and will not swap between sides on the same door aperture. You also need to specify whether you need the upper or lower hinge for the door in question, as these are separate components and breakers will need to know which one you require. Getting both the side and the hinge position right before ordering will save time and return costs.