Cheap Nissan Micra ECU
Need a used Nissan Micra ecu? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Nissan Micra ecu
A used ecu that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's petrol or diesel
- State the engine code if known
Other used Nissan Micra parts
- Used Nissan Micra Clutch Slave Cylinder
- Used Nissan Micra Engine
- Used Nissan Micra Water Pump
- Used Nissan Micra Flywheel
- Used Nissan Micra Cylinder Head
- Used Nissan Micra Radio
- Used Nissan Micra Battery
- Used Nissan Micra Oil Pump
- Used Nissan Micra Rear Tailgate
- Used Nissan Micra Heater Matrix
- Used Nissan Micra Front Grille
- Used Nissan Micra Drive Shaft
Used ecu for other Nissan models
Fitment questions
Does every Nissan Micra have an ECU?
Yes, every Nissan Micra has an ECU (engine control unit) — it is a standard component on all petrol and diesel variants across all generations, managing fuelling, ignition, and emissions. There is no variant of the Micra that was sold without one, so you will always find a used ECU listed for this model.
Will a Nissan Micra K11 ECU (1993–2002) fit my later K12 Micra (2003–2010)?
No — the K11 (1993–2002) and K12 (2003–2010) are entirely different generations with different engines, wiring looms, and engine management systems, so their ECUs are not interchangeable. The K11 used engines such as the CG10DE and CG13DE, while the K12 introduced units like the CR10DE and CR12DE, each requiring its own matched ECU. Always source an ECU from the same generation as your car, and confirm the exact engine code with the breaker.
Does the trim level — for example Vibe, Urbis, or Tekna — affect which ECU I need?
No, trim level does not affect ECU fitment on the Nissan Micra — trims like Vibe, Urbis, and Tekna are primarily cosmetic and equipment-based distinctions, not mechanical ones. What actually determines fitment is the engine code, fuel type, and gearbox type. Give the breaker your engine code (found on your V5C or via a VIN check) rather than your trim name.
I have a 2007 Micra K12 — will an ECU from a 2003 K12 fit it?
The K12 generation ran from 2003 to 2010, and ECU compatibility within that generation depends primarily on the engine code matching exactly, as well as whether the gearbox type (manual or automatic) is the same. There were running production changes across the K12's lifespan that may have affected ancillary components and software calibration, so a 2003-to-2007 swap is not guaranteed even with the same engine code. Confirm the specific part number and engine code directly with the breaker against your registration before purchasing.
Will a K13 Micra ECU (2010–2017) fit a K14 Micra (2017 onwards)?
No — the K13 (2010–2017) and K14 (2017 onwards) are separate generations with different engine families and engine management architectures, so their ECUs are not compatible. The K14 introduced new turbocharged three-cylinder engines not found in the K13, making the distinction especially significant. Always match the ECU to the correct generation and engine code.
Do I need to do anything after fitting a used Micra ECU?
ECU coding and immobiliser pairing are areas where requirements can vary and we cannot state the specifics as fact — a used ECU may need to be programmed or matched to your vehicle's immobiliser system. You should confirm with the breaker and a Nissan-specialist garage whether the unit will need coding before or after fitting. Do not assume a plug-and-play swap, as an uncoded ECU may leave the car unable to start.