Compare prices on a used Nissan Almera brake caliper from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used brake calipers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Nissan Almera ran in two distinct generations: the N15 (1995–2000) and the N16 (2000–2006), so a caliper from a 2000 car could be either generation depending on exactly when in 2000 it was built. If both cars are confirmed N15, the calipers are likely compatible, but if the donor is an early N16 you are crossing a generation boundary and fitment is not guaranteed — confirm the generation against both registrations with the breaker before ordering.
Yes, engine size can affect brake caliper fitment on the Almera because larger-engined variants were sometimes fitted with uprated brakes to cope with the extra power and weight. A caliper from a 1.4 car may not be the same as one from a 1.8, so always tell the breaker your exact engine size alongside your registration. Do not assume calipers are interchangeable across the engine range without checking.
Trim level does not in itself determine which brake caliper was fitted to the Nissan Almera — the generation and engine size are the key factors. Calipers from different trim levels within the same generation and engine size are generally the same unit, so an S, GX, or SE caliper should not differ in any functionally meaningful way. Bear in mind that a used caliper may show different surface finish or paint colour, but this has no effect on fitment or function.
The N15 (1995–2000) and N16 (2000–2006) are different generations with different body structures and running gear, so calipers from the N15 are very unlikely to fit an N16 without modification. These generations should be treated as separate vehicles for parts purposes. Always confirm the exact generation with the breaker against your registration rather than assuming cross-generation compatibility.
Yes, brake calipers are side-specific — the nearside (NS, left) and offside (OS, right) are handed opposites and will not swap. Always state clearly which side you need when contacting a breaker, and double-check the side on any caliper before fitting. Fitting the wrong side is a safety risk, so never assume a caliper can be swapped left to right.
Yes, all Nissan Almera variants across both the N15 and N16 generations are fitted with brake calipers — at least on the front axle, which uses disc brakes as standard. Rear brake arrangement can vary by variant, with some cars using rear drum brakes rather than rear disc calipers, so if you need a rear caliper confirm with the breaker that your specific car was built with rear discs rather than drums.