Mercedes-Benz Citan Windscreen Replacement Parts

The Citan has run in two main generations: the first-generation (W415) ran from 2012 to 2021, and the second-generation (W420) launched in 2021 onwards. Windscreens are not interchangeable between these two generations, so always make sure the breaker confirms the part is from the correct generation for your vehicle. Within each generation there may be further differences depending on whether your vehicle has ADAS camera brackets or heated glass, so have your registration to hand when you contact a breaker.

This question spans the W415-to-W420 generation boundary, which is the key cut-off point for Citan windscreen fitment. The 2021 model year is where the second-generation W420 was introduced, so a screen from a 2018 W415 is very unlikely to be a direct fit for a 2021 W420. Confirm the exact generation of both vehicles with the breaker before ordering, and check whether either vehicle has ADAS camera brackets or heated glass, as these differences will also affect compatibility.

No, the trim level — whether that's Base, Progressive, Tourer, or Pro — does not affect which windscreen you need. What does matter is your generation (W415 or W420), whether your screen is heated, and whether it has a bracket for an ADAS camera. You may find a screen sourced from a different trim looks very slightly different cosmetically in minor ways, but the trim name itself is not a fitment factor.

Yes, this is an important fitment consideration. If your vehicle has an ADAS camera (used for lane-keeping assist, autonomous emergency braking, or similar systems), the replacement windscreen needs to have the correct bracket or mounting point to support it. A screen without the bracket will not allow the camera to be refitted correctly and could affect the function of your safety systems. Confirm with the breaker that the screen they have matches your specific ADAS setup by checking against your registration.

Yes, heated and unheated windscreens are not interchangeable. A heated windscreen has embedded elements and requires electrical connections that a standard screen does not have. Check your current screen and your vehicle's spec carefully, and tell the breaker whether yours is heated before agreeing to buy. Fitting an unheated screen to a vehicle wired for heating will mean losing that function.

The Citan van and Citan Tourer share the same platform within each generation, so the generation (W415 or W420) remains the primary fitment factor rather than the van or Tourer body style. However, you should still confirm with the breaker that the screen matches on the heated and ADAS camera bracket points, as these can vary regardless of body style. Never assume a part fits without the breaker verifying it against your registration.