Mazda Premacy Wheel Trims Replacement Parts

The Mazda Premacy (sold in the UK roughly from 1999 to 2005) was fitted with steel wheels and plastic wheel trims on its lower and mid-range variants, so genuine Premacy wheel trims do exist as a used part. Higher-specification models came with alloy wheels instead, meaning those cars never had trims fitted from the factory. If your car has alloys and you are simply missing a centre cap, that is a different part entirely and worth mentioning to the breaker.

The Mazda Premacy ran as a single generation in the UK from approximately 1999 to 2005, with a facelift introduced around 2002 that brought styling updates but the underlying steel wheel specification did not change significantly. That said, whether trims from a pre-facelift car will clip securely onto a facelift car's wheels depends on the exact wheel diameter and clip pattern, so you should confirm this with the breaker against your registration before buying. Trim diameter — typically 15 inch — is the key detail to match.

For wheel trims, engine size does not affect fitment — the trims are determined by the steel wheel size fitted to your car, not by whether you have the 1.8 or 2.0 petrol engine. Both engines were available in the Premacy but the wheel rim diameter is what matters, so check your existing wheel or door-sill sticker for the tyre and rim size. Let the breaker know that size and they can match accordingly.

Trim level does not affect the mechanical fitment of wheel trims, as they simply clip onto the steel wheel rim and the clip pattern is determined by wheel size rather than specification grade. However, different trim levels may have had different styled trims from the factory, so a trim sourced from a different grade may look noticeably different even if it physically fits. If appearance matters to you, mention this to the breaker so they can try to match the original style.

Check the tyre sidewall on your existing wheel — you will see a size code such as 195/60 R15, where the R15 tells you the wheel diameter in inches, and this is the critical figure for trim fitment. Premacy models were commonly fitted with 15-inch steel wheels, but confirm this on your own car before ordering. Pass this measurement to the breaker alongside your registration and they can check the part against a donor vehicle.

Used Premacy wheel trims are a common find at breakers since the cars are often broken with all four trims still present, but availability naturally varies. It is worth asking the breaker whether they can supply a full set of four or just individual trims, and whether they are scuffed or intact, as condition varies significantly on plastic trims. Confirm the wheel diameter with the breaker against your registration to ensure you are getting the correct size.