Mazda Premacy Fog Light Replacement Parts

Fog lights were fitted to some Premacy variants but not all — they were typically included on higher specification trim levels rather than base models, so whether your car has them depends on the specific spec it left the factory with. If you are looking to add fog lights to a car that did not originally have them, you may also need the wiring, switch, and bumper with the correct apertures, so it is worth discussing the full kit with the breaker. Check your bumper for existing fog light housings or blanking covers to confirm what your car was built with.

The Mazda Premacy ran in the UK across two main generations — the first generation (CP) covered roughly 1999 to 2004, and the second generation (CR) ran from around 2005 onwards, with the CR receiving a facelift in approximately 2008 that updated the front-end styling including lights and bumpers. These generation boundaries are the most important thing to get right when sourcing a fog light, as parts from the CP and CR are not interchangeable. Knowing which generation your car is will immediately narrow your search to the correct parts.

No — a 2004 car is a first-generation CP Premacy and a 2006 car is a second-generation CR Premacy, so the front-end panels and lights are from entirely different designs and will not interchange. You need to match the generation first and foremost, so make sure the breaker is supplying a CR-generation part for your 2006 car. Always confirm the exact part against your registration with the breaker before purchasing.

The CR Premacy received a facelift at around 2008 which updated the front end, and fog lights, bumpers and grilles commonly change at facelift boundaries, so there is a real chance the parts are different. Whether a specific pre-facelift fog light physically swaps onto a post-facelift bumper is something you should confirm directly with the breaker against your registration, as fitment across that boundary cannot be guaranteed. Give the breaker your reg number so they can check the exact part for your car's build date.

Trim level does not affect the design or fitment of the fog light itself — the front-end panels are shared across the range within a generation, so a fog light from one trim will be the same unit as another trim within the same generation and facelift period. The main practical difference is that lower trims may have been built without fog lights at all and their bumpers may have blanking plates instead of apertures, which is a separate consideration. Provided the car has fog lights fitted, focus on getting the right generation and facelift period rather than worrying about trim name.

No — engine choice makes no difference to fog light fitment on the Premacy, as the front-end panels are shared regardless of whether the car has a petrol or diesel engine. What matters is the generation (CP or CR) and whether the car is pre- or post-facelift, not what is under the bonnet. Confirm the part against your registration with the breaker to make sure you are getting the right unit for your specific car's build date.