Mazda CX-30 Fog Light Replacement Parts

The CX-30 was launched in 2019 and fog lights are fitted to some trim levels but not all — higher specification trims such as Sport and GT Sport tend to include front fog lights, while entry-level SE-L variants may omit them. If your car did not leave the factory with fog lights, the bumper will have blanking panels in the fog light apertures rather than the lamp units themselves. Before ordering, check your own bumper to confirm whether apertures are present, and verify with the breaker that the lamp you are buying matches a car that was factory-fitted with them.

The CX-30 received a facelift for the 2022 model year, which brought updates to the front end including revised bumper and lighting design, so a pre-facelift fog light (2019–2021) and a post-facelift unit (2022 onwards) may well differ in shape and fixing points. The generation boundary here is the key question — name the registration year of both the donor car and your own to the breaker and ask them to confirm the parts cross-reference before you commit. Never assume a pre-2022 unit will drop straight into a post-2022 bumper without that check. Fitment cannot be guaranteed.

Trim level does not affect the design or fitment of the fog light unit itself on the CX-30 — a Sport and a GT Sport share the same front fog lamp where both are fitted. The main practical difference to be aware of is that some lower trims had blanking panels instead of fog lights, so make sure the donor car actually had factory fog lights fitted rather than blanks. Confirm with the breaker using your registration to avoid buying a unit from a car that was originally blanked-off.

Both the 2019 and 2021 CX-30 sit within the pre-facelift generation (2019–2021), so fog lights from these years should be from the same family of front-end components. That said, always confirm the part number with the breaker against your specific registration, as minor running changes can occur within a generation. This is your best chance of a straightforward swap, but fitment cannot be guaranteed.

On the CX-30, the front fog lights are individual left-hand (nearside, NS) and right-hand (offside, OS) units, and they are handed — they are not interchangeable with each other. When contacting a breaker, be clear whether you need the NS (driver's left, UK kerb side) or OS (driver's right) unit to avoid receiving the wrong part. Confirm this clearly alongside the model year of your car to get the correct lamp.

The CX-30 was offered with different lighting technology across its range, and whether a fog light from a donor car matches your car's setup is something you should confirm directly with the breaker rather than assume. Give the breaker your full registration so they can cross-reference the specification of the donor vehicle against yours. This is especially important if your car has an integrated LED fog lamp rather than a conventional bulb fitting, as these can differ in connector and housing design.