Used Mazda MX-5 Clutch
Get quotes for a used or replacement Mazda MX-5 clutch. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Mazda MX-5 clutch
No two clutchs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's petrol or diesel
- State the engine code if known
Other used Mazda MX-5 parts
- Used Mazda MX-5 Clutch Slave Cylinder
- Used Mazda MX-5 Gear Stick
- Used Mazda MX-5 Gearbox
- Used Mazda MX-5 Water Pump
- Used Mazda MX-5 Bonnet Latch
- Used Mazda MX-5 Headlight
- Used Mazda MX-5 Rear View Mirror
- Used Mazda MX-5 Throttle Body
- Used Mazda MX-5 Exhaust Manifold
- Used Mazda MX-5 Sunroof
- Used Mazda MX-5 Spoiler
- Used Mazda MX-5 Oil Pump
Used clutch for other Mazda models
Fitment questions
Does a clutch from an NA MX-5 (1989–1997) fit an NB MX-5 (1998–2005)?
The NA and NB generations share some engineering DNA, but the clutch assemblies are not straightforwardly interchangeable across that 1997–1998 generational boundary, as changes were made to the engine and gearbox during the transition. Your engine code — found on your V5 or via a VIN check — is the single most reliable detail to give a breaker, as fitment follows the engine code rather than the generation badge. Confirm compatibility against your specific registration with the breaker before purchasing.
Will a clutch from a 2006–2015 NC MX-5 fit my 2016–onwards ND MX-5?
The NC (2006–2015) and ND (2016–present) are completely different platforms with different engines, so their clutch components are not interchangeable across that boundary. The ND moved to a new engine family, meaning engine code is especially important here — supply yours to the breaker so they can match the correct clutch kit. Do not assume any NC clutch parts will cross over to the ND.
Does the trim level affect which clutch I need — for example, does a Sport or Icon trim MX-5 use a different clutch to a standard SE?
Trim level does not affect clutch fitment on the MX-5 — Sport, Icon, SE, and other trim variants within the same generation and engine code all use the same clutch assembly. What matters is the engine code and gearbox type, not what badge is on the car. Be aware that other components around the drivetrain may vary between trims, but the clutch itself is driven by the mechanical specification.
Does my MX-5 even have a clutch — I've heard some versions are automatic?
Most MX-5s sold in the UK were fitted with a manual gearbox and therefore do have a conventional clutch; however, some variants across the generations were offered with an automatic gearbox, which does not use a friction clutch in the traditional sense. If your MX-5 is automatic, you would not be looking for a clutch — you would need automatic transmission components instead. Check your V5 or the gearbox type listed on a VIN check to confirm which you have before searching.
Does the 1.6 MX-5 use the same clutch as the 1.8 MX-5?
The 1.6 and 1.8 engine variants within the same generation typically use different clutch components, as the clutch is sized and rated to match the engine's torque output and the specific gearbox fitted. Always supply your engine code — not just the engine size — to the breaker, as there can be variations even within the same displacement across production years. Confirm fitment against your registration with the breaker before ordering.
Can I use a clutch from an early NB MX-5 (1998–2000) on a later facelifted NB (2001–2005)?
The NB received a facelift around 2001 which brought some mechanical updates alongside the styling changes, and whether the clutch components cross over within the NB generation is something to confirm with the breaker against your registration and engine code. Within a generation, clutch fitment often remains consistent, but ancillary and mounting changes mid-production can affect compatibility and should not be assumed. Give the breaker your full engine code and registration for a reliable answer.