Second Hand Mazda CX-3 Bonnet Strut

The Mazda CX-3 uses a bonnet strut (gas strut) rather than a traditional prop rod, so you are looking for the right part. There is typically one strut fitted to support the bonnet when open, mounted on the NS or OS depending on the vehicle's configuration. When sourcing from a breaker, confirm they are supplying the strut assembly rather than just a rod or stay.

The Mazda CX-3 received a facelift in 2018, updating the front-end styling including the bonnet, grille, and lights, which can affect how the bonnet strut mounts and operates. Parts from the pre-facelift generation (2015-2018) may not be directly compatible with the post-facelift model (2018-onwards) due to potential changes in bonnet geometry or mounting points. You should confirm with the breaker whether the strut from the year of their donor vehicle matches your exact registration before purchasing.

Trim level does not affect which bonnet strut is fitted to the Mazda CX-3, as this is a mechanical component shared across the range regardless of specification. Whether your car is a base SE or a top-spec GT Sport Nav, the strut should be the same within the same generation and facelift period. You can safely disregard trim level when searching, but do confirm the donor vehicle's model year matches your facelift period.

The Mazda CX-3 facelift occurred in 2018, bringing changes to the front end including the bonnet profile, grille, and lighting. Because the bonnet itself can differ between pre-facelift (2015-2018) and post-facelift (2018-onwards) cars, the strut that supports it may also differ in length or mounting position. Always check with the breaker that the strut came from a vehicle on the same side of the 2018 facelift as yours.

Engine type does not affect which bonnet strut is fitted to the CX-3, as the strut is determined by the bonnet and bodyshell, not the drivetrain beneath it. You do not need to specify petrol or diesel when asking a breaker for this part. Focus instead on the model year and whether your car is pre- or post-2018 facelift.

The CX-3, CX-5, and CX-30 are distinct models built on different platforms with different bonnet sizes and profiles, so their struts are not interchangeable. Always source a strut specifically listed for the CX-3, and give the breaker your registration number so they can verify the correct part from their donor vehicle. Cross-model fitment is not something a breaker or Findapart can guarantee without checking the specific part numbers.