Second Hand Mazda 6 Roof Rack

The Mazda 6 does not come with a factory-fitted roof rack as standard on any variant — it has no integrated roof rails built into the bodyshell. Roof racks for the Mazda 6 are aftermarket accessories that clamp to the door frames or roof channels, so there is no OEM roof rack to source from a breaker. If you are looking for used Mazda 6 roof rails or a rack, you are most likely after a branded aftermarket system such as Thule or Rhino-Rack that a previous owner fitted and then removed — search for these as accessories rather than car parts.

No — roof racks are body-style specific because the roofline length, width, and door-frame geometry differ significantly between the estate (Tourer) and the hatchback (Sport) body styles of the Mazda 6. A rack sized and clamped for the estate will not fit the hatchback correctly, and vice versa. Always confirm the body style with the seller and check that the foot pack or clamp kit matches your specific body style.

These are entirely different platforms with different rooflines, door apertures, and roof curvature, so a rack or foot pack set up for the first-generation GG/GY platform will not transfer correctly to the second-generation GH platform. Aftermarket rack manufacturers treat these as separate fitment listings, so you would need to match the foot pack and fitting kit to the correct generation. Confirm any claimed cross-generation fitment with the breaker against your registration before purchasing.

Both the 2013 and 2017 cars sit on the third-generation GJ platform (produced from 2013 onwards), with a mid-life facelift arriving around 2015–2016, so they share the same basic roof architecture. In practice, aftermarket foot packs for third-generation Mazda 6 cars are usually listed as a single fitment range, but minor pressing or trim changes between pre-facelift and post-facelift cars could affect clamp positioning — confirm this with the breaker against your exact registration to be sure.

Trim level makes no difference to roof rack fitment on the Mazda 6 — the roofline and door-frame geometry are identical across SE, SE-L, Sport Nav, GT Sport, and other UK trim grades. The only things that matter are the generation and the body style (hatchback or estate). You may find cosmetic differences in the colour or finish of an aftermarket rack a previous owner fitted, but these do not affect whether it will fit your car.

Because a Mazda 6 roof rack is an aftermarket accessory rather than a factory part, you need to confirm the exact brand, model, and foot-pack reference number so you can verify it is listed for your generation and body style. Ask the breaker whether all four feet, the load bars, and any locking cores or keys are included, as missing components can make the rack unusable. Always cross-reference the rack's fitment guide against your registration before committing to a purchase.