Mazda 6 Propshaft Replacement Parts
Compare prices on a used Mazda 6 propshaft from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Mazda 6 propshaft
A used propshaft that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State if it's 2WD or 4WD
- State whether it's front or rear if applicable
Other used Mazda 6 parts
- Used Mazda 6 Wheel Trims
- Used Mazda 6 Steering Wheel
- Used Mazda 6 Front Cross Member
- Used Mazda 6 Coil Spring
- Used Mazda 6 Differential
- Used Mazda 6 Rear Cross Member
- Used Mazda 6 Radio
- Used Mazda 6 Wiper Motor
- Used Mazda 6 Catalytic Converter
- Used Mazda 6 Clutch Master Cylinder
- Used Mazda 6 AC Compressor
- Used Mazda 6 Starter Motor
Used propshaft for other Mazda models
Fitment questions
Does a Mazda 6 propshaft exist? I can't find one listed anywhere.
The Mazda 6 is a front-wheel-drive car in all of its standard forms, which means it does not have a propshaft — there is no rear-wheel-drive or four-wheel-drive layout on any mainstream UK Mazda 6 variant to require one. If you are hearing a drivetrain noise or vibration, the part you are most likely looking for is a driveshaft (also called a CV shaft or halfshaft), which transmits drive from the gearbox to the front wheels. A UK breaker will be able to quote you for the correct NS or OS front driveshaft once you confirm your registration.
I've been told I need a propshaft on my Mazda 6 — could the garage mean something else?
It is very likely your garage means a front driveshaft rather than a propshaft, as the Mazda 6 is front-wheel-drive only and has never been fitted with a propshaft in any generation sold in the UK. There are two driveshafts on the Mazda 6 — one on the nearside (NS, left) and one on the offside (OS, right) — so make sure you confirm which side is needed before requesting quotes from a breaker. If your garage has written 'propshaft' on an estimate, it is worth going back to clarify, as breakers will not find a propshaft listed for this model.
Does the Mazda 6 2.2 diesel have a propshaft that the 2.0 petrol doesn't?
No — neither the 2.2 diesel nor the 2.0 petrol Mazda 6 has a propshaft, because all engine variants of the Mazda 6 across all generations drive the front wheels only. Engine size does affect other running gear such as driveshaft sizing and brake specification, so if you are sourcing a driveshaft it is worth confirming the engine variant with your breaker. The part you need is almost certainly a front driveshaft rather than a propshaft.
Will a first-generation Mazda 6 propshaft fit a second-generation model?
The Mazda 6 does not have a propshaft in any generation — the first generation ran from 2002 to 2007 and the second generation from 2008 to 2012, but both are front-wheel-drive in all variants. If you are looking for a driveshaft, first and second generation parts are not interchangeable due to differences in suspension and drivetrain dimensions, so confirm your exact registration with the breaker. The correct search term for what you need is a front driveshaft or CV shaft.
Does trim level affect whether a Mazda 6 has a propshaft — for example, does a Sport have one and a SE not?
Trim level makes no difference here because no Mazda 6 trim — whether SE, Sport, or any other — was ever built with rear-wheel-drive or four-wheel-drive, so none of them have a propshaft. Trim does affect equipment levels and cosmetics but not the drivetrain layout on this model. If you need a driveshaft, trim level is not a fitment concern, though engine size may be — confirm with your breaker using your registration.