Cheap Hyundai Tucson Propshaft
Compare prices on a used Hyundai Tucson propshaft from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Hyundai Tucson propshaft
No two propshafts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State if it's 2WD or 4WD
- State whether it's front or rear if applicable
Other used Hyundai Tucson parts
- Used Hyundai Tucson Shock Absorber
- Used Hyundai Tucson Wheel Hub
- Used Hyundai Tucson Power Steering Pump
- Used Hyundai Tucson Axle
- Used Hyundai Tucson Front Bumper
- Used Hyundai Tucson Gearbox
- Used Hyundai Tucson DPF
- Used Hyundai Tucson Wiper Motor
- Used Hyundai Tucson Central Locking Motor
- Used Hyundai Tucson Turbo
- Used Hyundai Tucson Dashboard
- Used Hyundai Tucson Quarter Panel
Used propshaft for other Hyundai models
Fitment questions
Does the Hyundai Tucson have a propshaft?
Only certain Tucson variants have a propshaft — specifically those fitted with four-wheel drive (4WD/AWD). Front-wheel-drive Tucsons have no propshaft at all, so if your car is FWD you will not find this part on it. Check your V5C or the sticker inside the driver's door jamb to confirm whether your car is 4WD before searching for this part.
Will a propshaft from a first-gen Tucson (2004–2009) fit a second-gen Tucson (2009–2015)?
The first-generation Tucson ran from 2004 to 2009 and the second generation from 2009 to 2015, and these are distinct platforms with different drivetrains, so the propshaft from one generation will not reliably fit the other. You should only be looking at parts from the same generation as your car. Always confirm the exact part against your registration with the breaker before buying.
Does a propshaft from a 2012 Tucson fit a 2014 facelift Tucson?
The second-generation Tucson (2009–2015) received a facelift around 2013–2014, but this was primarily cosmetic and the fundamental drivetrain architecture remained the same within the generation. A propshaft from a 2012 4WD Tucson may well interchange with a 2014 4WD Tucson, but differences in engine size or AWD system calibration could affect compatibility. Confirm the specific part number against your registration with the breaker before purchasing.
Does the engine size affect which propshaft I need on a Tucson?
It can do — the Tucson was offered with different engine options including 1.6, 2.0, and 2.4-litre petrols and 1.7 and 2.0-litre diesels across its generations, and the propshaft fitted can vary depending on the drivetrain and power output. It is worth telling the breaker exactly which engine you have alongside your registration, not just the model name. Never assume a propshaft from a different engine variant will be a straight swap.
Does trim level affect which propshaft I need — for example, does an S-spec Tucson use the same propshaft as a Premium or Sport?
Trim level itself does not affect propshaft fitment — what matters is whether your Tucson is 4WD or FWD, which generation it is, and which engine it has. An S, Premium, or Sport trim Tucson with the same drivetrain and engine within the same generation should use the same propshaft. However, always confirm with the breaker using your registration, as the 4WD system must match between donor and recipient vehicle.
Where can I find a used propshaft for my 4WD Hyundai Tucson in the UK?
Used Tucson propshafts are sourced from vehicle dismantlers (breakers) who break up end-of-life cars for parts. On Findapart, you submit your registration and the breakers will quote you for a propshaft that matches your specific generation and drivetrain. Make sure to tell the breaker your engine size and confirm the car is 4WD, as this is essential for finding the correct part.