Findapart

Used Hyundai ix35 Fuel Filter

Need a used Hyundai ix35 fuel filter? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Hyundai ix35 fuel filter

No two fuel filters are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Hyundai ix35 parts

Used fuel filter for other Hyundai models

Fitment questions

Does the Hyundai ix35 actually have a fuel filter I can replace?

It depends entirely on your fuel type. Diesel ix35s (1.7 CRDi and 2.0 CRDi engines) have a serviceable fuel filter, usually integrated into the fuel filter housing in the engine bay. Petrol ix35s (2.0 GDi and 2.0 MPI) typically have a non-serviceable filter that is either sealed within the fuel pump assembly in the tank or has no conventional separate filter at all, so if you have a petrol model, confirm with your breaker exactly what you are looking for before ordering.

Will a fuel filter from an early ix35 fit my later facelift model?

The ix35 ran from 2010 to 2015 in the UK, with a facelift arriving in 2013. On the diesel variants, the filter housing and fitment can differ between pre-facelift and post-facelift cars even on the same engine code, so a pre-2013 filter is not a guaranteed fit on a 2013-onwards car. Name the boundary clearly to your breaker and confirm against your exact registration before buying, as ancillary mounting changes mid-production mean a visual match is not always a fitment match.

Does the engine code matter more than the year when buying a used ix35 fuel filter?

Yes, the engine code is the single most reliable guide for diesel ix35 fuel filter fitment — more so than the year or badge. The 1.7 CRDi (engine code D4FD) and 2.0 CRDi (engine code D4HA) use different filter assemblies, so two ix35s from the same year can need completely different parts. Check your V5 or run a VIN check to get your engine code, and always quote it to the breaker.

Does the trim level affect which fuel filter I need — for example, does an ix35 S need a different filter to a Premium or Premium SE?

No, the trim level makes no difference to fuel filter fitment on the ix35. The S, SE, Premium, and Premium SE trims all share the same mechanical drivetrain components within each engine variant, so the filter is determined by your engine code and fuel type, not the trim badge. The only difference you might notice when collecting a part from a breaker is cosmetic trim around the engine bay, which has no bearing on the filter itself.

I have a 2.0 CRDi ix35 — will a fuel filter from a Hyundai Tucson first generation fit it?

The first-generation Tucson (JM, roughly 2004–2010) predates the ix35 and used different diesel engines and filter assemblies, so cross-generation fitment is not straightforward. However, the ix35 is mechanically closely related to the Kia Sportage of the same generation (SL, 2010–2015), which shares the D4HA engine, and there is known parts overlap — but you should still confirm the exact part number with your breaker against both registrations before buying, as production changes mean even closely related models can differ.

Can I use a fuel filter from a 2.0 CRDi 4WD ix35 on my 2.0 CRDi 2WD ix35?

The fuel filter on the ix35 follows the engine code rather than the drivetrain layout, so a 2.0 CRDi D4HA filter from a four-wheel-drive car is generally the same unit as on a front-wheel-drive car with the same engine. That said, confirm with your breaker against both registrations, as ancillary bracket or housing details can occasionally vary between drivetrain configurations within the same production run.