Used Ford Tourneo Track Rod

Yes, all Ford Tourneo variants use track rods as part of the front steering assembly, connecting the steering rack to the wheel hubs on both the nearside (NS) and offside (OS) — this is standard on front-wheel-drive vehicles like the Tourneo. The track rod is a real, fittable part on this model and exists across all engine sizes and trims.

The Ford Tourneo Connect changed generation around 2013 (first generation roughly 2002–2013, second generation 2013 onwards), and the steering geometry was revised, so a track rod from the first generation is very unlikely to be a direct swap onto the second generation. Always confirm with the breaker against your exact registration before purchasing across that boundary.

For the Tourneo, engine size does not typically affect track rod fitment in the way it might affect brake components — the steering geometry is governed by the platform and generation rather than what's under the bonnet. Confirm the generation and model year with your breaker, and that should be the key information they need.

Trim level does not affect track rod fitment on the Ford Tourneo — the steering components are shared across trim grades within the same generation. You may find minor cosmetic differences on surrounding parts, but the track rod itself is not trim-specific, so a Zetec or Titanium part from the same generation should be interchangeable.

Yes — track rods are side-specific on the Tourneo, so you must specify whether you need the nearside (NS, left-hand side as you sit in the car) or offside (OS, right-hand side) when contacting a breaker. Getting this wrong means the part won't fit your steering geometry correctly, so double-check before ordering.

The Tourneo is a passenger-focused vehicle rather than a van, so payload rating is less of a variable for track rod fitment than it would be on a Transit or similar commercial model — generation and model year are the primary fitment factors here. That said, if you are unsure whether your vehicle has any heavy-duty running gear specification, confirm against your registration with the breaker to be certain.