Ford Galaxy Brake Caliper Replacement Parts

The Ford Galaxy has run across two main generations in the UK: the first-generation model ran from 1995 to 2006, and the second-generation (sometimes called the Mk2) ran from 2006 onwards into the 2010s. Calipers from the first generation are very unlikely to cross over to the second generation due to different underpinnings, so always match within the correct generation. Even within a generation, engine size can affect brake specification, so confirm with the breaker against your exact registration before ordering.

Yes, all variants of the Ford Galaxy use disc brakes with calipers — at least on the front axle, and rear disc brakes with calipers are fitted on most versions too. The Galaxy is a large MPV, so hydraulic calipers are a genuine and straightforward part to source from a breaker. You will need to specify front (NS or OS) or rear when requesting a quote.

Yes, engine size can influence brake specification on the Galaxy — larger or more powerful engines tend to be paired with bigger brake assemblies to manage the additional weight and performance demands. If you are sourcing a caliper for a 2.8 V6 or a higher-output diesel compared to a 1.9 TDI or 2.0 petrol, the caliper dimensions or mounting may differ. Always tell the breaker your exact engine size and registration so they can match the correct unit.

This is a generation boundary: the first-generation Galaxy ran to 2006, and the second-generation arrived for 2006–2007 onwards on updated underpinnings shared with later Ford and Volkswagen platforms. A 2005 car sits in the first generation and a 2007 car in the second, so the calipers are very unlikely to be interchangeable. Confirm the specific part numbers with the breaker against both registrations before purchasing.

Trim level alone — whether that is Zetec, Ghia, or Titanium — does not determine which brake caliper you need on the Ford Galaxy. What matters far more is the generation of the car and the engine size fitted. Focus on telling the breaker your year, engine size, and whether you need a front or rear caliper (and which side, NS or OS), rather than worrying about trim name.

No, front and rear calipers on the Ford Galaxy are different units — the front calipers are larger to handle the majority of braking force, while the rear calipers are smaller and on many versions incorporate a handbrake mechanism. Always specify whether you need a front or rear unit, and also which side (NS — nearside/left, or OS — offside/right) when contacting a breaker. Mixing front and rear calipers is not possible, so be precise in your enquiry.