Used Ford Galaxy Windscreen

The Ford Galaxy has gone through distinct generations: the first-generation (Mk1) ran from 1995 to 2006, the second-generation (Mk2) ran from 2006 to 2015, and the third-generation (Mk3) ran from 2015 onwards. Windscreens are not shared between these generations, so you need to make sure any used screen matches your exact generation. Always confirm the generation with the breaker against your registration before ordering.

Both a 2010 and a 2014 Galaxy fall within the Mk2 generation (2006–2015), so there is a reasonable chance of compatibility, but the Mk2 had running changes over its production life and ADAS camera brackets or heated windscreen elements may differ between earlier and later cars in that range. Do not assume they are identical - confirm with the breaker using both registrations to check whether the features on the donor screen match your car.

Yes, this matters significantly - 2015 sits at the boundary between the Mk2 (2006–2015) and Mk3 (2015 onwards) generations, and these two screens are not interchangeable. A 2015 registration could be either generation depending on the exact build date, so you should confirm with the breaker using your full registration to establish which generation your car actually is before they source a screen.

Trim level does not affect windscreen fitment on the Ford Galaxy - a Titanium and a Zetec of the same generation use the same glass. What does matter is whether your car has a heated windscreen or an ADAS camera bracket fitted, as these features vary by specification rather than trim name and the screen must match. Tell the breaker whether your current screen is heated and whether it has a camera or sensor bracket, and they will source the correct one.

If your Galaxy has a forward-facing ADAS camera (for lane-keeping, automatic emergency braking, or similar systems), the replacement windscreen must have the correct bracket or prepared zone to mount that camera, otherwise the system will not work properly. Whether a specific used screen from a breaker is compatible with your exact ADAS setup is something you should confirm directly with the breaker against your registration, as bracket designs can vary. Do not fit a plain screen without checking this first.

Yes, this is one of the most important things to get right - a heated windscreen has electrical elements built into the glass, and fitting an unheated screen in place of a heated one means losing that function entirely, while the connectors may also differ. Check whether your current windscreen is heated before speaking to a breaker, and make sure the replacement matches. A breaker will be able to confirm from your registration which type your car was built with.